Summary of Contents for Fire Innovations COMANCHE NFPA ESCAPE BELT
Page 1
Sized to be donned over the turnout pants. Easy forward fine adjustment. With the optional Multi-Use Strap ® this belt is a NFPA Ladder Belt. Fire Innovations 830 Petaluma Blvd N Three gear loops allow installation of Petaluma, California 94952 multiple tool holders and accessories.
REPAIR Programs, and NFPA 1983, Standard on Life Safety Rope and Equipment for Emergency Services. Fire Innovations requires that all repair work be done by the manufacturer. All other repair work INSPECTION or modifications may void the warranty and shall release Fire Innovations, LLC from all liability and Inspect the belt according to your department’s...
Page 3
Fire Innovations products, please refer to this number 3BFO when searching for UL registration. 10. Country of origin. Fire Innovations takes pride of the fact that we use only US made raw goods for our belts.
PRODUCT OVERVIEW The Comanche Belt is intended to be a certified NFPA 1983:2012 Fire Resistance (FR) Escape/Ladder* Belt (with MUS). It was design to be assign to an individual, and be fixed to either the turnout pants or placed cover the coat. The gross adjustment allows the firefighter belt to be sized to a wide range of waist sizes (28”-50”).
Page 6
The Cheyenne Escape Belt has been tested and certified to be able to have multiple NFPA Attachment Points. Fire Innovations recommends a maximum of three (3). The standard belt comes with one (1). Additional NFPA attachment points can installed to allow connectivity to bailout systems, as an example.
Page 7
ACCESSORIES MULTI-USE STRAP™ / NFPA LADDER STRAP • A certified NFPA 1983:2012 Fire Resistance (FR) Ladder strap • A one leg harness • Used in RIT operations to drag a down firefighter • NFPA Positioning Point (Safety strap) in an aerial platform/bucket •...
Page 8
ACCESSORY OR BAILOUT POUCH Accessory pouches allow stowage of the Multi-Use Strap as well as a multitude of firefighter accessories such as tethers, gloves, etc. The installation procedures shown below apply to all accessory pouches. These pouches are recommended to be installed on the closest gear loops to the fixed Attachment Point (D-Ring). On the Low Profile Pouch an additional step is required.
Page 9
AXE - TOOL HOLDER The Tool/Axe Loop can be installed on any available Gear Loop, although the recommended installation is on the second Gear Loop from the fixed Attachment Point (D-Ring). Use caution when donning/doffing your belt with a tool in the Axe/Tool Holder. Tool may fall and cause serious injury.
Page 10
SCABBARD CLIP AKA FEMALE CLIP The tool clip allows quick connection and disconnection of various tool holders, while retaining the durability and flexibility needed for today’s firefighter. REQUIRED TOOLS: Philips screwdriver TOOL CLIP Start by removing the corner screws from the Position the clip securing brackets behind clip assembly.
Review Request Form included with the product or available online and fax or mail it back to Fire Innovations. Once the form is reviewed, a RMA will be issued. The customer must return the product, shipping charges prepaid, along with the warranty request to the provided address.
Page 12
COMANCHE ® NFPA ESCAPE BELT NFPA LADDER BELT Fire Innovations 830 Petaluma Blvd N Petaluma, California 94952 United States www.fireinnovations.com...
Need help?
Do you have a question about the COMANCHE NFPA ESCAPE BELT and is the answer not in the manual?
Questions and answers