Advertisement
1
Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
A
Place the centre speaker above or close to the TV.
B
Place the subwoofer on the floor, at least one metre
away from the TV.
C
Place the front speakers at equal distances from the
TV.
D
Place the rear speakers at the back or beside the
listening position.
B
Connect the main unit to TV
Television (rear)
SCART IN
SCART IN
Main Unit (rear)
Connect a scart cable (supplied) from the SCART
TO TV socket on the main unit to the SCART IN
socket on your TV.
Note It is important to connect the main unit
directly to your TV. When watching the TV
programmes, you can press AUX (MP3 LINK)
repeatedly on the remote control until 'SCART IN' is
displayed, to get the sound output from the speakers.
hts3164_12_qsg_eng4_final_wk752.2 2
hts3164_12_qsg_eng4_final_wk752.2 2
C
Connect the speakers and subwoofer
Connect the various coloured plugs from the speakers
and subwoofer to the same coloured sockets at the rear
of the main unit.
FRONT CENTER
SUBWOOFER
REAR
REAR
FRONT
FRONT
RIGHT
LEFT
RIGHT
LEFT
Main Unit (rear)
D
Connect the radio antenna and
power cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
A
FM antenna
B
Main Unit (rear)
A
Connect the FM antenna (supplied) to the inner pin
of the FM 75
socket. Extend the wire for
optimum reception.
B
Connect the power cable from the main unit to the
AC power outlet.
E
Connect audio output from other
device (optional)
Use a red and white audio cables (not supplied) to
connect the AUDIO IN-AUX sockets on the main unit
to the AUDIO OUT sockets on the connected device
(for example, DVD recorder, VCR, Cable/Satellite Box).
AUDIO
OUT
AUDIO OUT
DVD recorder/ VCR/
Cable/ Satellite Box
AUX
L
R
Main Unit (rear)
AUDIO IN
Note Press AUX (MP3 LINK) repeatedly on the
remote control until 'AUX' is displayed as the source
you want to listen to.
2
Set up
A
Finding the viewing channel
Press 2 (Standby-On) on the main unit to turn it
A
on.
B
Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Standby button
Main Unit (Front)
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
°
control repeatedly (or AV, SELECT,
button) until
you see the Video In channel.
B
Select the display language on the
screen
A
Press OPTIONS.
The { General Setup } appears.
B
Press
.
General Setup
Disc Lock
Auto
English
Display Dim
OSD Language
Dansk
Screen Saver
Nederlands
Suomi
Sleep
Français
DivX(R) VOD Code
Deutsch
Italiano
Press OPTIONS to exit menu
C
Use
keys to select { OSD Language } and press
.
D
Use
keys to select a language option in the
menu and press OK to confirm.
E
Press OPTIONS to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theatre system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preferences) available on this Home Theatre
System. Refer to the user manual for more information.
2007-12-28 12:57:36 PM
2007-12-28 12:57:36 PM
Advertisement
