Advertisement
KP-Jumbo
Pneumatic Carton Stapler
MANUAL/WARNING:
IMPORTANT PLEASE READ BEFORE USING TOOL
Please read the following operating instructions manual.
Refer to this manual for safety, adjustment and trouble
shooting instructions. If you have any further questions
please contact your distributor.
1320 Tower Road Schaumburg, IL 60173
Phone:
888-392-9947
Fax:
877-393-2948
Advertisement
Table of Contents
Summary of Contents for KLINCH-PAK KP-Jumbo
- Page 1 KP-Jumbo Pneumatic Carton Stapler MANUAL/WARNING: IMPORTANT PLEASE READ BEFORE USING TOOL Please read the following operating instructions manual. Refer to this manual for safety, adjustment and trouble shooting instructions. If you have any further questions please contact your distributor. 1320 Tower Road Schaumburg, IL 60173...
- Page 2 NOTES 1320 Tower Road Schaumburg, IL 60173 Phone: 888-392-9947 Fax: 877-393-2948...
-
Page 3: Table Of Contents
TABLE OF CONTENTS PAGE TOOL SPECIFICATIONS ........................4 SAFETY INSTRUCTIONS ........................5 LUBRICATION AND MAINTENANCE ....................6 ADJUSTING FOR STAPLE LEG LENGTH .................... 6 TROUBLE SHOOTING ........................... 7 TOOL SCHEMATIC ..........................8 PARTS LIST ............................9 1320 Tower Road Schaumburg, IL 60173 Phone: 888-392-9947 Fax:... -
Page 4: Tool Specifications
TOOL SPECIFICATIONS MODEL OF TOOL ………………………………………………..…………….KP-Jumbo Staplers DIMENSIONS （LENGTH x HEIGHT x WIDTH） ..........14.2" x 13.2" x 6.8" WEIGHT （WITHOUT FASTENERS） ............... 13.2 lbs COMPRESSED AIR： MAXIMUM PERMISSIBLE OPERATING PRESSURE ......99 PSI RECOMMENDED OPERATING PRESSURE ..........71 PSI AIR CONSUMPTION .................. -
Page 5: Safety Instructions
SAFETY INSTRUCTIONS • Read this manual and understand all safety instructions before operation of the tool. If you have any questions, please contact our Authorized Representatives. • Never allow use of any type of Flammable Gases or Oxygen as a power source for the tool. -
Page 6: Lubrication And Maintenance
LUBRICATION AND MAINTENANCE • Your tool requires lubrication before you use for the First Time. • Disconnect the Air Supply from the tool before lubricating • Turn the tool so the inlet is facing up and put one drop of Lubricating Oil into air inlet. -
Page 7: Trouble Shooting
TROUBLE SHOOTING PROBLEM CAUSE REMEDY O-RING ON VALVE （010）OR ON AIR LEAKAGE FROM O-RING MUST BE REPLACED TUBE（011）ARE DAMAGED . TRIGGER . O-RINGSON VALVE（010）OR ON AIR LEAKAGE FROM O-RING MUST BE REPLACED TUBE（011）ARE DAMAGED . EXHAUST PORT . PISTON’S O-RING（503）IS O-RING MUST BE REPLACED DAMAGED . -
Page 8: Tool Schematic
1320 Tower Road Schaumburg, IL 60173 Phone: 888-392-9947 Fax: 877-393-2948... -
Page 9: Parts List
1320 Tower Road Schaumburg, IL 60173 Phone: 888-392-9947 Fax: 877-393-2948... - Page 10 Visit our web site www.axxisus.com Email us @ reception.inc@axxisus.com 1320 Tower Road Schaumburg, IL 60173 Phone: 888-392-9947 Fax: 877-393-2948...
Need help?
Do you have a question about the KP-Jumbo and is the answer not in the manual?
Questions and answers