Advertisement
1
Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
* Tallboy rear speakers for HTS3566D model.
A
Place the center speaker above or close to the TV.
B
Place the subwoofer on the floor, at least one meter
away from the TV.
C
Place the front speakers at equal distances from the
TV.
D
Place the rear speakers at normal listening ear level.
B
Connect the main unit to TV
Television
(rear)
VIDEO IN
(CVBS)
VIDEO IN
(CVBS)
AUX 2
AUX 1
Main Unit (rear)
Use the supplied composite video cable to connect
the CVBS jack on the main unit to the VIDEO IN
jack on your TV.
Note It is important to connect the main unit
directly to your TV.
1_hts3565-66D_37_qsg_eng2_final82 2
1_hts3565-66D_37_qsg_eng2_final82 2
C
Assemble the tallboy speakers
(for HTS3566D only)
B
C
A
A
Connect the speaker cables to the matching colour
sockets on the speakers (or speaker stands).
B
Place the stands upright and lock the speakers down
into position.
C
Secure the position with screws (supplied).
D
Connect the speakers and
subwoofer
Connect the various colored cables from the speakers
and subwoofer to the same colored jacks at the rear of
the main unit.
FRONT CENTER
SUBWOOFER
FRONT
FRONT
LEFT
RIGHT
REAR
REAR
LEFT
RIGHT
AUX 2
AUX 1
Main Unit (rear)
* Tallboy rear speakers for HTS3566D model.
E
Connect the radio antenna and
power cable
Keep the antenna away from the electronic devices to
prevent unwanted interference.
A
FM antenna
B
AUX 2
AUX 1
Main Unit (rear)
A
Connect the FM antenna (supplied) to the inner pin
of the FM 75
jack. (For some models, it has been
connected in the factory.) Extend the wire for
optimum reception.
B
Connect in the power cable from the main unit to
the AC power outlet.
F
Connect audio output from TV
(optional)
To hear the TV audio through this unit, use a red and
white audio cables (not supplied) to connect the AUDIO
IN-AUX1 or AUDIO IN-AUX2 jacks on the main unit to
the AUDIO OUT jacks on your TV.
AUDIO
OUT
AUDIO OUT
AUDIO
OUT
AUDIO IN
Television
(rear)
AUX 2
AUX 1
Main Unit (rear)
AUX 2
Note When watching the TV programs, you can
press AUX (MP3 LINK) repeatedly on the remote
control until 'AUX1' or 'AUX2' is displayed to get the
sound output from the speakers.
2
Set up
A
Finding the viewing channel
Press 2 on the main unit to turn it on.
A
B
Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Main Unit (Front)
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
°
control repeatedly (or AV, SELECT,
button) until
you see the Video In channel. If you are using a RF
modulator, set the TV to channel 3 or 4.
B
Select the display language on the
screen
A
Press OPTIONS.
The { General Setup }
appears.
B
Press
.
General Setup
Disc Lock
Display Dim
OSD Language
Auto
English
Screen Saver
Français
Sleep
Espanõl
DivX(R) VOD Code
Press OPTIONS to exit menu
C
Use
keys to select { OSD Language } in the
menu, then press
.
D
Use
keys to select a language and press OK to
confirm.
E
Press OPTIONS to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theater system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preferences) available on this Home Theater
System. Refer to the user manual for more information.
2008-03-27 11:21:44 AM
2008-03-27 11:21:44 AM
Advertisement
