Advertisement
1
Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
A
Place the centre speaker above or close to the TV.
B
Place the subwoofer on the floor, at least one metre
away from the TV.
C
Place the front speakers at equal distances from the
TV.
D
Place the rear speakers at the back or beside the
listening position.
B
Connect the main unit to TV
Television (rear)
VIDEO IN
(CVBS)
VIDEO IN
(CVBS)
Main Unit (rear)
Y
Use the supplied composite video cable to connect
the CVBS socket on the main unit to the VIDEO IN
socket on your TV.
Note It is important to connect the main unit
directly to your TV.
hts3011_55_qsg_eng3_Final807.ind2 2
hts3011_55_qsg_eng3_Final807.ind2 2
C
Connect the speakers and subwoofer
Connect the various coloured plugs from the speakers
and subwoofer to the same coloured sockets at the rear
of the main unit.
SUBWOOFER
FRONT CENTER
FRONT
FRONT
REAR
REAR
LEFT
RIGHT
RIGHT
LEFT
Main Unit (rear)
D
Connect the radio antennas and
power cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
AM/MW loop antenna
B
C
D
A
FM antenna
A
Connect the FM antenna (supplied) to the inner pin
of the FM 75
socket. Extend the wire for optimum
reception.
B
Unfold the AM/MW loop antenna (supplied) and fix
the claw into the slot.
C
Press on the AM/MW tabs and insert the wires into
the sockets.
D
Connect the power cable from the main unit to the
AC power outlet.
E
Connect audio
output from TV
(optional)
To hear the TV audio through this unit, use a red and
white audio cables (not supplied) to connect the AUDIO
IN-AUX sockets on the main unit to the AUDIO OUT
sockets on your TV.
AUDIO
OUT
AUDIO OUT
AUDIO
OUT
AUDIO IN
TV (rear)
Main Unit (rear)
Note When watching the TV programs, you can
press AUX repeatedly on the remote control until
'AUX1' or 'AUX2' is displayed to get the sound output
from the speakers.
2
Set up
A
Finding the viewing channel
A
Press STANDBY-ON on the main unit to turn it
on.
B
Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Main Unit (Front)
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
°
control repeatedly (or AV, SELECT,
button) until
you see the Video In channel.
B
Select the display language on the
screen
A
Press OPTIONS.
The { General Setup } appears.
B
Press
.
General Setup
Disc Lock
Display Dim
OSD Language
English
Screen Saver
Español
Sleep
Brazil Por
DivX(R) VOD Code
Press OPTIONS to exit menu
C
Use
keys to select { OSD Language } and press
.
D
Use
keys to select a language option in the
menu and press OK to confirm.
E
Press OPTIONS to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theatre system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preferences) available on this Home Theatre
System. Refer to the user manual for more information.
2008-02-12 5:52:57 PM
2008-02-12 5:52:57 PM
Advertisement
