GENESIS INTERNATIONAL SHERLOCK Quick Start Manual

FAIL-SAFE REMOTE ALARM AND STROBE
Kit Includes:
Remote Alarm and Strobe
9V DC, 500 mA Power Supply
(12 V DC from Sherlock Monitor can also be used)
WITH PLUG IN TRANSFORMER
44-0359 SREMOTEALARM&STROBE
SHERLOCK

OVERVIEW

The SHERLOCK FAIL SAFE REMOTE ALARM
WITH STROBE will alert the user to an alarm
condition. It is activated by opening up a self
looping dry contact signal. The unit has a built in
green "Pilot" light that is always lit to let the user
know the REMOTE ALARM WITH STROBE is
working properly. The remote alarm has a built-
in red LED and a 90 db buzzer to signal an alarm
condition. The unit is equipped with a test button
to insure the REMOTE ALARM WITH STROBE
is working properly and also a 30 minute alarm
silence button. After 30 minutes the buzzer will
be reactivated if the alarm condition still exists.
Ideal for offi ce use. The REMOTE ALARM WITH
STROBE easily connects to any SHERLOCK
REFRIGERANT Monitor or any other normally
closed alarm contact.
The REMOTE ALARM WITH STROBE may be
placed up to 5000 feet from the signal source
using 18 Gauge twisted pair signal wire.

DIMENSIONS

5 1/8" x 5 3/8" x 5"
ENVIRONMENT NEMA 1 Indoor
10 to 120°F (-10 to 50° C)

POWER INPUT

9 VDC, 500mA
wall mounted transformer
SOUND OUTPUT 90db at 2 ft
FLASHING RATE 60 to 100 fl ashes/Min

BRIGHTNESS

60,000 Candle Power

LENS

High Impact resistant, Acrylic
Blue Part #
Red Part #
Amber Part # 88-0535
88-0109
88-0532
08-11-07