Fabrication Enterprises POINT RELIEF Series Instructions For Use

Advertisement

POINT RELIEF
Massager
Instructions for Use
Fabrication Enterprises, Inc.
PO Box 1500, White Plains, NY 10602 (USA)
Fabrication
Enterprises
tel:
800-431-2830
Incorporated
fax: 800-634-5370
info@FabricationEnterprises.com
914-345-9300
914-345-9800
INSTRUCTIONS FOR USE

Installing the battery

Turn the battery cover coun-
terclockwise (
) and remove.
Insert the C-size battery with
(+) positive side facing down.
Replace the battery cover by
pressing down and turning
clockwise (
).

Removing cap for use

Remove gray cap by pulling
straight off to expose mas-
sager tip. Can also be used
with cap on for wider coverage.
Tip insertion and
removal
Select desired massage tip.
Line up notch on tip base with
groove on massager opening.
Insert and push down as far as
it will go. To remove tip, pull
straight out.

Massaging

Remove the cap and turn the
switch to the "ON" position.
Massager is ready to use on
specific areas.

Safety tips

Do NOT use on the throat or
around eyes.
Pregnant or individuals with in-
ternal disorders should NOT
use massager on areas of
concern.
Never use massager on in-
fants, children or unconscious
person.
Do NOT use the massager
with compress or rubbing
medications for skin irritations
may result.
Do NOT use in room where
humidity is very high such as a
bathroom. This may result in
wire corrosion.
Unit is NOT waterproof. Do not
immerse in water or use sol-
vents to clean. Use only a
damp cloth .
Do NOT drop or leave in sun.
Damage to plastic housing
may result.
Do NOT leave dead battery in
unit for extended period of
time. It may leak and cause
contact corrosion.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the POINT RELIEF Series and is the answer not in the manual?

Questions and answers

M L BENNING
July 5, 2025

I DO NOT see a plastic disc to remove in the BOTTOM of the battery compartment of the point relief massager. There is nothing loose in the bottom of the battery compartment. REF 14-1050. Maybe it wasn't in the bottom?

Summary of Contents for Fabrication Enterprises POINT RELIEF Series

  • Page 1 Do NOT drop or leave in sun. switch to the “ON” position. Damage to plastic housing Massager is ready to use on may result. Fabrication Enterprises, Inc. specific areas. PO Box 1500, White Plains, NY 10602 (USA) Do NOT leave dead battery in Fabrication...
  • Page 2 PARTS GUIDE 4 TIPS INCLUDED SWITCH BATTERY USE TIP FOR COVER BROADEST MASSAGE MASSAGE MAIN UNIT FEATURES UNIT SPECIFICATIONS Comfortable vibrating massage Power Source DC 1.5V (1 “C” cell, included) Compact, portable, small enough to fit in Battery Life 40 minutes of continuous operation C.P.M.

Table of Contents