Table of Contents
Advertisement
Sound
No sound.
•
Ensure that the audio cables are connected
and select the correct input source (for
example, AUDIO SOURCE ) for the device
you want to play.
No sound on HDMI connection.
•
You might not hear any sound if the
connected device is not HDCP (High-
bandwidth Digital Content Protection)
compliant or only DVI compatible. Use an
analog or digital audio connection.
•
Ensure that the
[HDMI Audio] is enabled .
No sound from TV program.
•
Connect an audio cable from the audio
input on the home theater to the audio
output on the TV, then press AUDIO
SOURCE repeatedly to select the correct
audio source.
Distorted sound or echo.
•
Ensure that the TV volume is muted or set
to minimum if you are playing audio through
the home theater.
Audio and video are not synchronized.
•
1) Press and hold
+/- within À ve seconds.
Play
Disc cannot be played.
•
Clean the disc.
•
Ensure that the home theater supports the
disc (see 'Product speciÀ cations' on page
16 ) .
•
Ensure that the home theater supports the
region code of the DVD.
•
For DVD±RW or DVD±R, ensure that the
disc is À nalized.
DivX video À les cannot be played.
•
Ensure that the DivX À le is encoded
according to the 'Home Theater ProÀ le'
with the DivX encoder.
•
Ensure that the DivX video À le is complete.
DivX subtitles do not display correctly.
•
Ensure that the subtitle À le name is the
same as the movie À le name.
•
Select the correct character set: 1) Press
SETUP . 2) Select [Preference Setup] .
3) Select [DivX Subtitle] . 4) Select a
supported character set. 5) Press OK .
18
EN
AUDIO SYNC . 2) Press
The contents of a USB storage device cannot be
read.
•
Ensure that the format of the USB storage
device is compatible with the home theater
(see 'Product speciÀ cations' on page 16 ) .
•
Ensure that the USB storage device
is formatted with a À le system that is
supported by the home theater (note that
NTFS is not supported).
'No entry' or 'x' sign appears on the TV.
•
The operation is not possible.
EasyLink feature does not work.
•
Ensure that the home theater is connected
to a Philips brand EasyLink TV and that
EasyLink is on .
I do not want my home theater to be switched
on when I switch on my TV.
•
This is the correct behavior for Philips
EasyLink (HDMI-CEC). To make the home
theater work independently, switch off
EasyLink .
Hide quick links:
Advertisement
Table of Contents
