iSmartAlarm Smart Switch Quick Installation Manual

Quick Installation Guide
Product Overview
The Smart Switch allows you to create scheduled
tasks and turn on or o home appliances from
anywhere using your smartphone.
Power button
How to Connect Your iSmartAlarm™
Smart Switch
1. Plug the Smart Switch into a power outlet and
make sure the power button's LED is solid white.
EN
2. Launch the iSmartAlarm
app and go to the Monitor
page.
4. Pull down the Safety
Monitor page and tap
on the Add Devices
button.
3. Select Safety Monitor
6. For more information，please visit
at the top.
https://www.ismartalarm.com/
iSmartAlarm™ CubeOne.
iPhone running iOS 6.0 or later, Android phone
running version 4.0 or later.
1. For indoor use only.
2. Make sure appliances are o before plugging into
the Smart Switch.
3. Do not use this product near water or in locations
that may cause the Smart Switch to become wet.
4. The maximum current for the Smart Switch is 10A
and the maximum power capacity is 2000 Watts.
5. After the Smart Switch
Exceeding this capacity may damage your Smart
is found, press the Add
Switch.
button to add it to
5. Avoid placing product near areas of high radiation
your system.
or heat such as radiators or stoves.
6. When unplugged, clean with a soft and dry cloth.
Do not use abrasive or solvent-based cleaners.
iSmartAlarm™ is a trademark of iSmart Alarm, Inc.
iPhone is a trademark of Apple Inc,
Registered in the U.S. and other countries.
©2014 iSmart Alarm, Inc. All rights reserved.
System Requirements
Safety Instructions