Prepare The Remote Control; Set Clock - Philips HSB2313/93 User Manual

OPTICAL
2
Connect the other end to the wall outlet.
HDMI IN 1 HDMI IN 2 HDMI OUT

Prepare the remote control

Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fi re. Never discard batteries in fi re.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
Note
•
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
1
Open the battery compartment.
2
Insert 2 AAA battery with correct polarity
(+/-) as indicated.
3
Close the battery compartment.

Set clock

1
In the standby mode, press and hold
CLOCK to enter the clock setting mode.
» Clock is displayed and the hour digits
begin to blink.
2
Press + VOL - to set the hour.
3
Press CLOCK to confi rm
»
The minute digits begin to blink.
4
Press + VOL - to set the minute.
EN 15