Advertisement
Installation Instructions for Mincey Marble Manufacturing's
Please read the following before attempting to install your new
DISCLAIMER NOTICE: If the prescribed method of installation is not followed
precisely, the foot rest may detach from the wall and cause damage to the panel
system and the sheetrock wall. If the foot rest detaches, physical injury to the
occupant of the shower may occur. Mincey Marble will not be liable for any
damages to persons or property because of incorrect installation.
These instructions have been written for Mincey Marble's FR-09 chrome plated wall
mount foot rest. If you have received a different product than shown, please contact our
office so we can send proper instructions to you.
Chrome Plated Wall Mount Foot Rest
Product number: FR- 09
chrome plated wall mount foot rest
Mincey Marble Mfg., Inc.
4321 Browns Bridge Road
Gainesville, GA 30504
Ph: 800.533.1806
Fx: 770.531.0935
www.minceymarble.com
FR - 09
1
Advertisement
Table of Contents
Summary of Contents for Mincey Marble Manufacturing FR-09
- Page 1 Mincey Marble will not be liable for any damages to persons or property because of incorrect installation. These instructions have been written for Mincey Marble’s FR-09 chrome plated wall mount foot rest. If you have received a different product than shown, please contact our office so we can send proper instructions to you.
- Page 2 6. Measuring tape 7. Safety glasses The FR-09 Chrome Plated Wall Mount Foot Rest REQUIRES blocking in the wall. If the wall you are getting ready to install this foot rest on does not have blocking behind it DO NOT INSTALL this foot rest.
- Page 3 Drawing A 4. Using the drill, drill four holes into the cast marble panel system. Take the 4 stainless steel screws from the accessories packet and using the #2 Philips head screwdriver, mount the brackets to the wall and tighten the screws till snug. Do not over tighten. 5.
Need help?
Do you have a question about the FR-09 and is the answer not in the manual?
Questions and answers