DreamGEAR Radium User Manual

for
PACKAGE CONTENTS:
• Radium Hard Wired Controller
• User's Guide/Warranty Card
• Registration Card
SET UP:
1. With the PlayStation 3 console powered ON, plug the Radium
Hard Wired Controller into one of the USB ports located on the
front of the PlayStation 3.
2. Press the Menu button located in the center of the Radium Hard
Wired Controller. The 4 channel indicators on the controller will
flash rapidly. Press the Menu button again and the controller will
be set to the appropriate channel. The solid LED will indicate
which player position the controller is set to: Player 1, 2, 3 or 4.
3. To connect multiple Radium Hard Wired Controllers, connect
each controller separately. First, connect Player 1's controller
and then connect the remaining controllers one by one.
NOTE: During gameplay, you can access the PlayStation 3 menu
by holding the Menu button for 3 seconds. Please refer to the
PlayStation 3 console User's Guide to see what menu options are
available.
TURBO FUNCTION:
1. Press any button at the same time as the Turbo button (located
above the 4 channel indicator lights) to set Turbo to that specific
button.
2. To cancel the Turbo function, repeat Step 1.