Turn on Progressive Scan
If you connect this unit to TV with the
component video connection (see chapter
'Connect video cables - Option 2: Connect to
component video jack' for details), you can turn
on the progressive scan output if your TV
supports progressive scan.
1
Turn on the TV to the correct viewing
channel for this unit.
2
Press DISC.
3
Press OPTIONS.
4
Press V to select
menu, then press B.
Video Setup
TV Type
TV Display
Picture Settings
HDMI Setup
Closed Caption
Progressive
5
Select [ Progressive ] > [ On ], then press
OK.
A warning message is displayed.
6
To proceed, select [ OK ] in the menu
and press OK.
The progressive setup is complete.
Note
•
If a blank/distorted screen is displayed, wait for 15
seconds for the auto recover.
•
If no picture displayed, turn off the progressive scan
mode as follows:
1) Press Z to open the disc compartment.
2) Press B.
3) Press SUBTITLE.
22
EN
[ Video Setup ] in the
On
Off
7
To exit the menu, press OPTIONS.
8
You can now turn on the progressive scan
mode on your TV (see the TV user
manual).
Note
•
There are some progressive scan TVs that are
not fully compatible with this unit, resulting in an
unnatural picture when playing back a DVD VIDEO
disc in the progressive scan mode. In such case, turn
off the progressive scan feature on this unit and your
TV.