Advertisement
1
Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
A
Place the DVD Home Theatre unit (SoundBar) at the
normal listening ear-level, or at least above the knee-
level. Face it straight ahead towards the listening
area.
B
Place the subwoofer on the floor, at least one metre
away from the TV.
B
Prepare for rear connections
A
Pull up the catch to remove the rear cover.
B
Connect the required cables (see the following
sections for details) and direct all the cables to the
CABLE OUT point.
Note All the cables must be placed properly inside
the rear panel in order for the rear cover to close.
C
Connect to TV
DVD Home Theatre unit (rear)
SCART OUT
HDMI OUT
(AUX-SCART)
Or
HDMI IN
SCART
If your TV supports HDMI, connect the HDMI cable
from the HDMI OUT socket to the HDMI IN socket
on your TV. Or;
Connect a scart cable from the SCART socket to
the SCART IN socket on your TV.
Note HDMI connection does not support audio
output from your TV to this unit, a separate audio
connection is required.
D
Connect docking station
DOCK
Connect the iPod docking station to DOCK socket.
A
B
Connect the composite video cable to the VIDEO
IN socket on your TV.
Note To adjust the dock 'support' to fi t your iPod,
you have to loosen the knob at the bottom of the unit.
To listen to the audio output from this connection,
press DOCK.
E
Connect audio output from TV (for
EasyLink control)
To hear the TV audio through this DVD Home Theatre
unit, connect an audio cable (not supplied) from the
TV AUDIO IN-AUX1 sockets to the AUDIO OUT
sockets on your TV.
L
R
TV AUDIO IN
(AUX1)
Note To listen to the audio output from this
connection, press AUX/DI /MP3 LINK repeatedly
until 'AUX1 INPUT' is displayed on the display panel.
F
Connect subwoofer and power
cable
Subwoofer (rear)
B
A
LOUDSPEAKERS
TO SUBWOOFER
A
Unwind the cables from TO MAIN UNIT on the
subwoofer, then connect the grey end cable to TO
SUBWOOFER socket and white end cable to
LOUDSPEAKERS socket on this DVD Home
Theatre unit.
B
Connect the power cable from subwoofer to the AC
power outlet.
2
Set up
A
Find the viewing channel
Press 2 to turn on this DVD Home Theatre unit.
A
B
Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
°
control repeatedly (or AV, SELECT,
button) until
you see the Video In channel.
B
Start Ambisound setup
When you turn on this DVD Home Theatre unit
(SoundBar) for the fi rst time, follow the instructions on
the TV to complete the setup.
OSD Language
Please choose your language:
English
Dansk
Deutsch
Español
Français
Italiano
Stop: Exit
Change
Select
A
Select a language for on-screen display, then press
B.
B
[ Welcome ] message is displayed, press B to
continue.
C
[ Orientation ] message is displayed, press B to
continue.
D
Select a most suitable predefined setting according
to your room environment and setup, press B to
confirm and go to the next setup screen.
[ Room Acoustics ]
Select the type of walls that surround your room.
The default setting is [ Hard (concrete, wood) ].
[ Room Placement ]
Select the SoundBar placement position in your
room. The default setting is [ Middle of room ].
[ Height ]
Select the height at which the SoundBar is placed.
The default setting is between 0.8~1.2 metres.
[ Listening Position ]
Select the distance between the listening position and
the SoundBar. The default setting is between 2~3
metres.
E
When [ Complete ] screen is displayed, press B to
exit.
Note Refer to the accompanying user manual
for other setup options.
Advertisement
