Advertisement
ALR-S350 sled handheld reader allows firmware upgradeability via the Android or iOS Alien
application residing on the mobile device used to connect to the sled.
The Alien ALR-S350 firmware includes the following components:
NUR firmware (firmware of the NUR RFID module)
NUR bootloader (bootloader of the NUR RFID module)
Device firmware (firmware of the reader)
To check current firmware revision and how to upgrade firmware of S350, launch the Alien
Demo application on the mobile device which is tethered to sled.
Specific instructions are included below for respective mobile device OS.
Launch Alien RFID Demo Application:
S350 Firmware Upgrade Guide
APN-1048
Advertisement
Table of Contents
Related Manuals for Alien ALR-S350
Summary of Contents for Alien ALR-S350
- Page 1 NUR bootloader (bootloader of the NUR RFID module) Device firmware (firmware of the reader) To check current firmware revision and how to upgrade firmware of S350, launch the Alien Demo application on the mobile device which is tethered to sled.
- Page 2 S350 Firmware Upgrade Guide APN-1048 ANDROID To update the ALR-S350 firmware with an Android phone and Alien RFID Demo application, perform the following steps: 1. Connect to the ALR-S350 to be upgraded 2. Click on Settings 3. Swipe right to left until the firmware update screen is seen.
- Page 3 APN-1048 4. Select firmware component to be updated. 5. Click on Alien Server and select the firmware to update PLEASE NOTE that for the Device Update the “L” version of the firmware (x.y.z-L) must be selected. 6. Click on Start Update. The ALR-S350 will briefly disconnect and the left and right LEDs will glow steady Orange...
- Page 4 7. The host device will indicate progress. 8. After the update is complete, the ALR-S350 will reboot automatically. To update the ALR-S350 firmware with an iPhone and Alien RFID Demo application, perform the following steps: Connect to the ALR-S350 to be upgraded...
- Page 5 S350 Firmware Upgrade Guide APN-1048 Select the firmware component to be updated. PLEASE NOTE: For device update, the “L” version of the firmware (x.y.z-L) must be selected.
- Page 6 APN-1048 Click the “Update” button Confirm update by clicking on Proceed button ALR-S350 will briefly disconnect and the left and right LEDs will glow steady ORANGE indicating unit is in update mode. Host Device will indicate progress. After update is complete, ALR-S350 will reboot.
Need help?
Do you have a question about the ALR-S350 and is the answer not in the manual?
Questions and answers