Subscribe to Our Youtube Channel
Summary of Contents for Larson Atkins X-51 V4
- Page 1 X-51 V4 RANGE CAMERA IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY BEFORE USE...
-
Page 2: Safety Precautions
3.3 and 3.4 of the RLN) of the ACMA of Australia. This product complies with all Australian radio communications laws. Larson Atkins Systems Pty Ltd is registered on the national database of the ACMA. WARNING TO AVOID POSSIBLE FAILURE OF TRANSMITTER, NEVER DISMANTLE THE UNIT. - Page 3 CONGRATULATIONS Congratulations on your purchase of the X51 V4 Range Camera. This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference. Contents Product Contents Operating Instructions...
-
Page 4: Product Contents
PRODUCT CONTENTS Check what you have received You have received 1 box. Please check the contents of the box against the list below. If anything is missing, please contact Customer Service. Supplied in box Transmitter / Receiver Unit Camera Unit Includes contents: Includes contents: •... - Page 5 OPERATING INSTRUCTIONS At Home Remove Receiver Unit and Transmitter / Camera Unit from box. Charge both the Receiver Unit and Transmitter / Camera Unit overnight before use. PLEASE NOTE: Only one Charging Unit and Cable are supplied in package. If you require a second Charging Set you can purchase from www.larsonatkins.com When the charger is plugged into the units, the...
- Page 6 OPERATING INSTRUCTIONS At Range Set up the Transmitter Unit approximately 5m from the target on a 45 degree angle, and align antenna to point in the direction of where you will be shooting from: Refer to diagram. Transmitter Unit (5m from target) Receiver Unit (with shooter)
- Page 7 OPERATING INSTRUCTIONS At Range Turn transmitter to the “On” position (The camera will now turn on and boot up). When first turned on, one light will illuminate to show the camera is doing a “limit movement” test. (This may take up to 1 minute, refer to picture) Once all lights are illuminated, the camera is ready.
- Page 8 2 green bars - full signal. Once you have red or green bars, you are ready to connect you phone to the App. Go to your Wi-Fi settings and connect to the “LARSON ATKINS” Wi-Fi network. PLEASE NOTE: This app does not use cellular data...
- Page 9 OPERATING INSTRUCTIONS To operate CamHi App Open the CamHi App on your Smart Device. Select the “Add Camera” button. Select “Search camera from LAN” and select camera. Select the tick icon in top right corner to action. Your camera will now be “Online”. Select synced camera in list.
- Page 10 OPERATING INSTRUCTIONS CamHi App Icons Mirror and Flip Image Mute Sound Zoom In / Out Take Snapshot Reception Record Video Power to App HD Option...
-
Page 11: Product Specifications
PRODUCT SPECIFICATIONS Specifications • 5 x Optical zoom. • 3 x Digital zoom. • HD 2.4 Mega-pixel camera. • 2km line of sight range. • Able to connect multiple cameras to the one receiver. • The only PTZ 360 degrees rotating camera. •... -
Page 12: Warranty
1.3 To make a claim under the Standard Warranty you will need to: a) Contact the Larson Atkins Systems Help Line on +61 403 592 877 to register your claim and provide the details to enable Larson Atkins Systems to assess the claim. - Page 13 1.6 Included in the Standard Warranty is an on-site or in-home pick-up service for products indicated in the table below. 1.7 The product will be at the owner’s risk whilst in transit to and from the Larson Atkins Systems Authorised Service Centre, unless transported by Larson Atkins Systems or its Authorised representatives.
- Page 14 4.0 To the full extent permitted by law but subject always to section 1.1: 4.1 Larson Atkins Systems will not be liable for any loss, damage or alterations to (1) third party hardware or software; or (2) programs, data or information stored on any media or any part of the product, no matter how occurring;...
- Page 15 NOTES...
- Page 16 LARSON ATKINS SYSTEMS LARSON ATKINS SYSTEMS Customer Service: +61 403 592 877 W: www.larsonatkins.com E: support@larsonatkins.com...
Need help?
Do you have a question about the X-51 V4 and is the answer not in the manual?
Questions and answers