Download Print this page

Specifications - Sealey PBI2212S Instructions

Roadstart emergency power packs dekra approved

Advertisement

obtain a Residual Current Device through your Sealey dealer. You must read and understand instructions concerning electrical safety.
1.3.1. The Electricity At Work Act 1989 requires all portable electrical appliances, if used on business premises, to be tested by a qualified
person, using a Portable Appliance Tester (PAT), at least once a year.
1.3.2. The Health & Safety at Work Act 1974 makes owners of electrical appliances responsible for the safe condition of the appliance and
the safety of the appliance operator. If in any doubt about electrical safety, contact a qualified electrician.
1.3.3. DO ensure that the insulation on all cables and the product itself is safe before connecting to the mains power supply.
1.3.4. DO ensure that cables are always protected against short circuit and overload.
1.3.5. DO regularly inspect power supply, leads, plugs for wear and damage and power connections to ensure that none is loose.
1.3.6. DO check product voltage is the same as power supply to be used.
2. INTRODUCTION
Manufactured with professional grade, high performance Hawker Enersys AGM battery produced in the USA specially formulated to jump-start
vehicles with AGM, calcium, lead acid and sealed lead acid batteries. The Hawker Enersys batteries are sealed and are able to be stored in any
position. These RoadStarts® are the first with DEKRA approval. Ventilation and integrated fan ensures potential gases escape safely.
Features a tough, high impact casing which is durable and corrosion proof for easy portability and is fitted with a rubber boot on the base to
protect unit from knocks and bangs. Fitted with isolating rotary on/off switch. All units feature two-function digital display which indicates internal
and vehicle's battery voltage and percentage of charge when charging internal batteries. Also indicates charging voltage when engine is
running. Connecting the vehicle's battery before the unit is switched on, allows the user to see the current battery voltage. A fusible link
integrated in the charging cable gives increased protection to the unit while making for an easier fuse change without disassembly. A 15A
thermal trip fuse is integrated in the 12V accessory socket, which if activated is self-resetting. Surge and spike protection prevent damage to
delicate and sophisticated vehicle electronics. Extra-long 1,000 strand pure copper output cables are flexible down to -40°C. The clamps are
manufactured with braided link to each jaw for maximum power transmission. Easy cable wrap storage with clamp 'holsters' ensure the unit is
compact and tidy when not in use. Audible warning system (AWS) to advise operator of reverse polarity, overvoltage (to protect 12V versions)
and connection reminder. The AWS will sound if charger has been turned on for too long without being connected to a battery. The external 2A
automatic charger/maintainer has been specifically programmed for Hawker batteries and features SpeedCharge® technology for fast, safe
charging and maintenance.

3. SPECIFICATIONS

Model No: . . . . . . . . . . . . . PBI2212S . . . . . . . . . . . . . PBI3612S . . . . . . . . . . . . . . PBI3624S . . . . . . . . . . . PBI4424S
Starting Current:. . . . . . . . . 545A. . . . . . . . . . . . . . . . . . 910A . . . . . . . . . . . . . . . . . . 690A . . . . . . . . . . . . . . . . 910/690A
Peak Amps: . . . . . . . . . . . . 1900A. . . . . . . . . . . . . . . . . 4400A . . . . . . . . . . . . . . . . . 3800A . . . . . . . . . . . . . 4400/3800A
Voltage: . . . . . . . . . . . . . . . 12V . . . . . . . . . . . . . . . . . . 12V . . . . . . . . . . . . . . . . . . . 24V . . . . . . . . . . . . . . . . . . . 12/24V
Auxiliary Output:. . . . . . . . . 12V . . . . . . . . . . . . . . . . . . 12V . . . . . . . . . . . . . . . . . . . 12V . . . . . . . . . . . . . . . . . . . . . 12V
Cable & Clamp Length: . . . 1.27mtr. . . . . . . . . . . . . . . . 1.39mtr . . . . . . . . . . . . . . . . 1.39mtr . . . . . . . . . . . . . . . .1.39mtr
Weight:. . . . . . . . . . . . . . . . 9.72kg . . . . . . . . . . . . . . . . 19.64kg . . . . . . . . . . . . . . . . 19.64kg . . . . . . . . . . . . . . . 19.64kg
Product Features
1) On/off switch (or 12V / 24V selector
on PBI4424S)
2) Digital display
3) 12V DC power outlet
4) Positive battery clamp
5) Negative battery clamp
6) Internal battery status button
© Jack Sealey Ltd
Original Language Version
PBI2212S,PBI3612S,PBI3624S,PBI4424S
Issue: 1 - 06/05/14

Advertisement

loading

This manual is also suitable for:

Pbi3612sPbi3624sPbi4424s