Advertisement
4.9.
set date & time
4.9.1.
Press 'set dAtA & time' key.
4.9.2.
Press 'uP' or 'doWn' key to add or subtract from the setting.
4.9.3.
Press 'enter' to scroll right; entering yy-mm-dd.
4.9.4.
When complete, press 'enter' for 2 seconds to store the set values.
4.10.
printer
do not operate the printer without first loading the paper strip under the print head (fig.9)
8
4.10.1.
to thread the print roll: connect the tester to a vehicle battery, thread the cleanly cut beginning
of the roll under the print head until resistance is felt and press the 'Print' button to feed
through.
4.10.2.
At the end of a test procedure, pressing 'Print' will print the last set of results.
4.10.3.
Alternatively, selecting 'VieW test result' (section 4.8.) and then pressing 'Print' will
print the entire test cycle.
4.10.4.
Printing roll spares are available. Part no. Bt2012.V2-01 (pack of 2).
Please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
5. troUbleshooting
5.1.
in the event of a poor connection, or a battery voltage in excess of 18V, the display will revert to the main menu.
5.2.
the printer will not function if the vehicle battery has a charge of less than 10V.
5.3.
if the display shows 'cHecK Print PAPer', replace printer paper or check the feed.
5.4.
if the printer exceeds temperature 75°, 'temP oVer' will display. Allow the unit to cool down before continuing.
environmental protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
weee regulations
dispose of this product at the end of its working life in compliance with the eu directive on
Waste electrical and electronic equipment (Weee). When the product is no longer required, it must be disposed
of in an environmentally protective way. contact your local solid waste authority for recycling information.
battery removal
see section 4.15
under the Waste Batteries and Accumulators regulations 2009, Jack sealey ltd are required to inform potential
purchasers of products containing batteries (as defined within these regulations), that they are registered wih Valpak's
registered compliance scheme. Jack sealey ltd's Batteries Producer registration number (BPrn) is BPrn00705.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMportant: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack sealey limited
sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar
Original Language Version
01284 757500
01284 703534
Bt2012.V2 | issue 4 (3) 17/01/18
fig.9
www.sealey.co.uk
sales@sealey.co.uk
Advertisement
