Using The Component Video Input Jacks - Philips 27RF50S Directions For Use Manual

U
SING THE
C
omponent Video inputs provide for
the highest possible color and pic-
ture resolution in the playback of digital
signal source material, such as with
DVD players. The color difference sig-
nals (Pb, Pr) and the luminance (Y) sig-
nal are connected and received sepa-
rately, which allows for improved color
bandwidth information (not possible
when using composite video or S-Video
connections).
Connect the Component (Y, Pb,
Pr) Video OUT jacks from the DVD
player (or similar device) to the (Y, Pb,
Pr) in(put) jacks on the TV.
Connect the red and white AUDIO
CABLES to the Audio (left and right)
output jacks on the rear of the accesso-
ry device to the Audio (L and R) AV1
in(put) jacks on the TV.
Turn the TV and the DVD (or dig-
ital accessory device) ON.
Press the CH + or – buttons to
scroll the available channels until AV1
appears in the upper left corner of the
TV screen.
Slide the TV/VCR/ACC Switch to
the ACC position.
Insert a DVD disc into the DVD
player and press the PLAY
on the remote.
S H
MART ELP
The description for the compo-
nent video connectors may differ
depending on the DVD player or acces-
sory digital source equipment used (for
example, Y, Pb, Pr; Y, B-Y, R-Y; Y, Cr,
Cb). Although abbreviations and terms
may vary, the letters b and r stand for
the blue and red color component signal
connectors, and Y indicates the lumi-
nance signal. Refer to your DVD or
digital accessory owner's manual for
definitions and connection details.
C
OMPONENT
BACK OF TV
75
COMPONENT
VIDEO CABLES
COMP VIDEO
Y
1
3
button
V I
IDEO NPUT
1
Monitor out AV1 in
COMPONENT VIDEO INPUT
VIDEO
Y
L/
Mono
S-VIDEO
AUDIO Pb
R
Pr
S-VIDEO AUDIO
VIDEO
Pb
OUT OUT OUT
Pr
5
VOL
25
J
ACKS
2
Monitor out AV1 in
75 COMPONENT VIDEO INPUT
VIDEO
L/ Y
Mono
S-VIDEO
AUDIO Pb
R
Pr
AUDIO IN
(RED/WHITE)
R
L
2
DVD, DBS OR SIMILAR ACCES-
SORY DEVICE EQUIPPED WITH
COMPONENT VIDEO JACKS.
6
4