Clas Ohlson TPWI-113D Quick Start Manual

Wireless Nunchuck
Art.no. 38-3352 Model TPWI-113D
Please read the entire instruction manual before using the product and save it for future reference. We reserve the right for any errors in
text or images and any necessary changes made to technical data. If you have any questions regarding technical problems please contact
Customer Services.
Safety
• Avoid exposing the nunchuck to high humidity or
temperatures.
• Do not disassemble, modify or try to repair the device
by yourself. Such work must be performed by a qualified
technician.
• Store the product away from dusty and dirty environments.
Contents
1 x receiver
1 x USB charger cable
1 x wireless nunchuck
Operation
1. Connect the Wii™ console to your TV.
2. Connect the wireless nunchuck receiver to the bottom of
your Wii™ controller.
3. When you turn on the nunchuck it will flash once.
4. Press the [PAIR] button to synchronise the Wii™ controller
with the nunchuck.
POWER
A
HOME
1
2
5. If synchronisation is successful, the "CONNECT" LED on the
receiver will flash. If synchronisation is unsuccessful, turn off
the nunchuck and repeat step 4 until the LED flashes.
GREAT BRITAIN For consumer contact, please visit www.clasohlson.co.uk
and click on customer service.
ENGLISH
CONNECT
CONNECT
PAIR
CONNECT
CONNECT
CONNECT
Helpful hints
1. The Wii™ controller and nunchuck must be synchronised
every time the console is turned on.
2. Do not press any buttons during the synchronisation process
since there is a risk that the nunchuck will not operate
properly. If there should be a problem, turn off the equipment
and try again.
3. If the nunchuck still will not synchronise with the Wii™
controller, check that it is properly connected to the controller
and that the battery in the nunchuck is charged.
Charging
1. Connect the USB cable (included) to the nunchuck.
2. Connect the USB connector to an available USB-port on the
Wii™ console.
3. The "CHARGE" LED will be lit when charging and will shut
off when charging is complete.
Battery
1. You can charge the nunchuck regardless if it is on or off.
2. If the nunchuck has a weak battery the "CONNECT"
LED will be lit.
3. If you wish to take a break from playing and want to save
power, depress the [PAIR] button for 4 seconds. The
LED will flash for 10 seconds and the nunchuck will enter
standby mode. The nunchuck will switch to standby mode
automatically if not used for 5 minutes. Press the [PAIR]
button to reactivate the nunchuck again.
Cleaning
Wipe the nunchuck with a damp cloth as and when required.
Do not use detergents.
Disposal
Follow local ordinances when disposing of this product. If you
are unsure of how to dispose of this product, please contact
your municipality.

Specifications

Battery 150 mAh lithium ion
Voltage 3.7 V
Initial charge time > 8 hours
Charge time approx. 2.5 hours
Range ≤ 5 metres
CHARGE