Table of Contents
Advertisement
Y
our Cable TV input into your home may
be a single (75 ohm) cable or a converter
box installation. In either case, the connec-
tion to the TV is very easy. Follow the steps
below to connect your cable signal to your
new television.
If your cable signal comes directly from a
round 75Ω coaxial cable use the following
steps:
1
Connect the open end of the round
Cable Company supplied cable to the
75Ω input on the TV. Screw it down fin-
ger tight.
2
Plug the television in to the wall outlet
and turn the TV on. Refer to the AUTO-
PROGRAM feature to program all the
available channels on your cable signal.
If your cable signal comes from a cable
box, use the following steps:
3
Connect the open end of the round
Cable Company supplied cable to the
cable signal IN(put) plug on the back
of the Cable Box.
4
Using a separate round coaxial cable,
connect one end to the OUT(put) plug
on the back of the Cable Box.
5
Connect the other end of the round
coaxial cable to the 75Ω input on the
back of the television. Screw it down
finger tight.
6
Plug the television in to the wall outlet
and turn the TV on. Refer to the TUNER
and AUTOPROGRAM features on page
3 of this Quick Use Guide. TUNER
should be set to the CABLE option.
AUTOPROGRAM can be set to program
all the available channels on your cable
signal into the television's memory.
c c C
I
HECK
After using the AutoProgram Control, press
the CH + and – buttons to scroll through all
the channels stored in the television's mem-
ory.
B
C
T
ASIC
ABLE
Direct Cable Connection:
Cable signal coming from
Cable Company (Round
75Ω coaxial cable)
Cable Box Connection:
Cable Signal
IN from the
Cable
Company
Round 75Ω
Coaxial Cable
O
T
UT
C
ELEVISION
ONNECTION
BACK OF TV
1
Jack Panel Back of TV
3
INPUT
5
Jack Panel Back of TV
5
2
75
Power Plug
from back of TV
Jack Panel Back
of Cable Box
4
OUTPUT
6
75
Power Plug
from back of TV
AC Power
Wall Outlet
AC Power
Wall Outlet
Advertisement
Table of Contents
