Advertisement
Quick Links
Instructions - - Parts List
Model 205715 Agitator
For mastic fluids.
0.7 MPa (7 bar, 100 psi) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440- -1441
Copyright 1977, Graco Inc. is registered to I.S. EN ISO 9001
307277L
EN
Advertisement
Summary of Contents for Graco 205715
- Page 1 0.7 MPa (7 bar, 100 psi) Maximum Working Pressure Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440- -1441 Copyright 1977, Graco Inc. is registered to I.S. EN ISO 9001...
- Page 2 D This equipment is for professional use only. D Read all instruction manuals, tags, and labels before operating the equipment. D Use the equipment only for its intended purpose. If you are uncertain about usage, call your Graco distributor. D Do not alter or modify this equipment. Use only genuine Graco parts and accessories.
- Page 3 WARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury. D Ground the equipment and the object being sprayed. Refer to Grounding on page NO TAG. D If there is any static sparking or you feel an electric shock while using this equipment, stop spray- ing immediately.
- Page 4 Installation Typical Installation Installing the Agitator This air operated agitator is for use with heavy materials, such as mastics. It has a 2.5 HP, 1000 RPM motor, and air line lubricator a shaft length of 825 mm (33.5 in.). agitator motor 1.
- Page 5 Operation Provide clean, dry air to the agitator. Use the needle valve (201) to control the speed of the motor. Do not exceed 0.7 MPa (7 bar, 100 psi) air pressure. Always use the lowest agitator speed CAUTION necessary to thoroughly mix the material. Excessive speeds cause the fluid to aerate.
- Page 6 NOTE: If the air motor still does not operate properly, If the motor is sluggish or inefficient, flush it with contact a Graco distributor. Do not try to repair the air non-flammable solvent in a well ventilated area. motor yourself.
- Page 7 Parts 209 201 Model 205715 Agitator Apply anaerobic Includes items 201 to 224 pipe sealant to the threads. NO. PART NO. DESCRIPTION 201 206264 VALVE, needle; 1/8 npt(f); 1/4 npt (m) 202 202659 LUBRICANT, air motor Apply anaerobic 204 205755...
- Page 8 With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.