Festool CXS Manual page 5

GB
CXS
Original operating manual
1 Symbols ..................................
2 Technical data ..........................
3 Intended use............................
4 Machine features ......................
5 Safety instructions ....................
6 Operation ................................
7 Settings...................................
8 Tool holder, attachments ............
9 Working with the machine ..........
10 Service and maintenance ...........
11 Accessories ..............................
12 Disposal ..................................
13 Transport .................................
14 Warranty .................................
15 EU Declaration of Conformity ......
The specified illustrations appear at the begin-
ning of the Operating Instructions.
1 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear ear protection.
Wear protective gloves.
Do not throw in the household waste.
2 Technical data
Cordless drill
Motor voltage
Idling speed*
Max. torque
soft/ hard material
Adjustable torque
Chuck clamping range
Drill diameter max.
Wood/ Metal
12
10,8 V
1st gear 0 - 400 rpm
2nd gear 0 - 1200 rpm
10/ 16 Nm
0,2 - 2,4 Nm
1 - 8 mm
12/ 8 mm
Cordless drill
12
Tool holder in drill spindle
12
Weight without battery pack
with Centrotec
12
12
Charger
13
Mains voltage (input)
14
Mains frequency
14
Charging voltage (output)
14
Rapid charging
15
Charging times for
15
LiIon 1,5 Ah, 80 %/ 100 %
15
15
Permitted operating tem-
perature range
16
Temperature monitoring
16
16
Battery pack
Voltage
Capacity
Number of cells
Permitted battery tempera-
ture for charging
Weight
* Speed specifications with fully charged bat-
tery pack.
3 Intended use
Cordless drills are suitable for drilling into met-
al, wood, plastics and similar materials as well
as inserting and tightening screws.
The charger MXC is designed for charging the
battery packs listed.
The charger is designed for internal use only.
The user shall be liable for damage and
accidents resulting from non-specified
use; this also includes damage and wear
caused during industrial continuous op-
CXS
eration.
4 Machine features
[1-1] Torque thumbwheel
[1-2] Drilling symbol
[1-3] Torque/drilling position marking
[1-4] Gear switch
[1-5] Right/left switch
[1-6] On/Off switch
[1-7] Belt clip
CXS
1/4 ''
0,7 kg
MXC
220 - 240 V ~
50/60 Hz
10.8 V=
typ. 2.8 A
approx. 23/ 35
min
-10 °C to
+ 40 °C
via NTC-resistor
BP-XS
10.8 V
1.5 Ah
3
0 °C to
+ 45 °C
0.2 kg