Kenmore 34562 Use & Care Manual page 8

CONVERSION INSTRUCTIONS
Rotisserie Burner Conversion
(Use for 5B)
For the 5 burner model, use the Rotisserie
Orifice that is marked "Use for Rotisserie
Burner".
1. Loosen and remove the 4 screws from the
back of firebox to remove the rear panel of the
rotisserie burner. (Fig. 14)
2. Insert the provided bayonet wrench with
the end of bigger opening into burner
opening and unscrew orifice from end of
valve. (Fig. 15)
3. Put the new orifice into the bayonet wrench and
tighten the new orifice into the valve.
Replace Rear Panel and screws. (Fig. 16)
Fig. 14
Fig. 15
Bayonet wrench
Fig. 16
8