Table of Contents
Advertisement
TV Setup
General
Setup
Menu background
Factory settings
OSD
Programme title
Teletext level 2.5
Auto surround
Set/Change code
General
This menu allows you to change various settings that are presumably adjusted less frequently than most
other settings.
Menu background
Select
or
Yes
No
on or off.
Factory settings
This resets the picture and sound settings to
their predefined factory values, but maintains
the channel installation settings.
OSD (On Screen Display)
&
Select
.
OSD
é
Select
to activate extended channel
Normal
and programme information.
display reduced channel information.
Note: When subtitles is switched on, see Features,
p.12, display of the programme number is not
possible
Programme title
Select
Programme title Yes
When selected
Yes
programme or after pressing the i key on
the remote control, a TV channel which
broadcasts teletext may transmit the name of
the TV channel or the programme title.
When selected
No
only appear after pressing the i key, and not
after the selection of a TV channel.
Auto Surround
Sometimes the broadcaster transmits special
signals for Surround Sound encoded
programmes.
The TV automatically switches to the best
surround sound mode when
switched
.
On
8
to turn the menu background
Minimum
or
.
No
, after the selection of a TV
, the programme title will
Auto Surround
The Setup menu contains items that control the settings
of the TV's functions, features, services and peripherals
you may have connected.
The
menu allows you to change settings that
General
will typically be accessed only occasionally.
The
menu allows you to select a source.
Source
i
Press the
key on the remote control to get
information about the selected menu item.
Teletext level 2.5
Some broadcasters offer the opportunity to
see more colours, other background colours
and nicer pictures in the teletext pages.
&
Select
é
Press the cursor right to select
2.5 On
"
Press the cursor right again to select
level 2.5 Off
teletext layout.
The selection made is valid for all channels
which broadcast teletext level 2.5.
will
Note: It may take a few seconds before teletext
broadcast switches over to Teletext level 2.5.
Set/Change code
The Child lock feature (see TV, Features, p. 12)
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels, a 4-digit code must be
entered.The Set/Change code menu item
allows you to create or change a Personal
Identification Number (PIN).
&
Select
é
If no code exists yet, the menu item is set to
Set code
If a code has previously been entered, the menu
item is set to
instructions on screen.
Important:You have forgotten your code !
&
Select
press
OK
is
é
Press the cursor right and enter the overriding
code 8-8-8-8.
"
Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
.
Teletext level 2.5
to take advantage of this feature.
if you like the more neutral
.
Set/Change code
.
Change code
in the General menu and
Change code
.
Teletext level
Teletext
. Follow the
Advertisement
Table of Contents
