Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ASTRO XX-A/V quad
Summary of Contents for ASTRO XX-A/V quad
- Page 1 -A/V quad Audio/Video-Modulator Card Operating Instructions...
- Page 2 Illustrations Illustrations Electronic equipment is not household waste – in accordance with directive 2002/96/EC OF THE EUROPEAN PARLIA- MENT AND THE COUNCIL of 27th January 2003 on used electrical and electronic equipment, it must be disposed of properly. At the end of its service life, take this unit for dispo- sal at a relevant official collection point.
-
Page 3: Table Of Contents
Contents 1 Description Description The X-A/V quad is used to modulate four audio and/or video sources and convert them into standard TV signals in the frequency range from 47 – 862 MHz. The card has Contents two output converters which belong together, which means that up to four A/V signals can be processed in Description . -
Page 4: Installation And Connectio
2 Installation and connection 2 Installation and connection Installation and connection Installation in the base unit Install the plug-in card in accordance with the descrip- tion. Important: The X-A/V quad must not be used in conjunction with any other base units than those listed above. Remove the covers from the base device (plug-in card slot) and insert the supplied female... -
Page 5: Connection Of Source Devices
2 Installation and connection 3 Programming with the HE programming software Connection of source devices Programming with the HE programming software A VCP 15-2 connecting cable (order no.: 350151; 1.4 m) is required in order to connect an A/V audio source Once it has been installed in the base device, the X-A/V device, such as a DVD player, camera etc. - Page 6 3 Programming with the HE programming software 3 Programming with the HE programming software As there are four different output channels, the RF- The output channel is also defined at this point. Please output parameters are defined in the card details rat- note that by defining the A channel for a pair of chan- her than in the overview window of the base unit.
-
Page 7: Programming With The Kc3
3 Programming with the HE programming software 4 Programming with the KC 3 Programming sequence Here you can attenuate the output level in steps of 0.5 dB. Structure After an attenuation value has been selected, it must be transferred to the card by clicking on the “Write The software is divided into two main groups. -
Page 8: Moving Between Menus
4 Programming with the KC 3 4 Programming with the KC 3 Moving between menus The RF output parameters are defined either by ente- ring the video carrier frequency directly using the key- • Use the ↑ and ↓ arrow keys to change between pad (row 3), or by changing the output channel value rows. -
Page 9: Pin Allocation
5 Pin allocation 4 Programming with the KC 3 Press the “Menu / Read” button repeatedly to go to the Pin allocation Error messages: Pin 1 = audio input, left In the event of a hardware fault on the plug-in card or Pin 2 = video input channel group an error code is output here. -
Page 10: Technical Data
6 Technical data Type X-A/V quad Order no. 380 322 RF modulator Output frequency [MHz] (47) 110–862 Output channels (C 2– C 69) S 2– C 69 Output level [dBµV] 90 – 100 Signal-to-intermodulation ratio [dB] typ. 60 Active return loss [dB] >... -
Page 11: Short-Overviev Of Programming Steps
7 Short-overviev of programming steps Start menu (appears once only after plugging in the KC 3): Choose Line 4 V16 Setup V16 Serie ASTRO V16 “ Menu / Read” Password on Version 1.19 VMS 616 Password 0000 Power Password OK Menu 1 = deutsch →... - Page 12 ASTRO Strobel Kommunikationssysteme GmbH Olefant 1–3 D-51427 Bergisch Gladbach (Bensberg) Tel. 0 22 04 / 405-0 Fax 0 22 04 / 405 10 http://www.astro-kom.de...
Need help?
Do you have a question about the XX-A/V quad and is the answer not in the manual?
Questions and answers