Figure 1: Hole details Take the mounting collar and place it face down and secure using the self tapping screws supplied (see Figures 2 & 2a Figure 2: Place the mounting ring on top of plenum www.waterloo.co.uk Tel: +44 (0) 1622 711500...
Page 3
(Figures 3 Figures 3a), whilst plenum and adjust as necessary prior to securing the Figures 3b and connect up the ductwork to the plenum as www.waterloo.co.uk Tel: +44 (0) 1622 711500...
Page 4
(marked with red arrow in Figures 4 Figure 4: Install the damper and rotate until correct Please note that Waterloo recommend that the damper is positioned in the fully open position for installation.
Page 5
P Series Floor Diffuser Commissioning to locate the location pip on the disc with the location Figure 7 Figure 7: Location pip and slot Figure 8 Finally, push home disc and it’s complete! (Figure 9 www.waterloo.co.uk Tel: +44 (0) 1622 711500...
Page 6
Figure 10: Insert hook & rotate 90 degrees… Pull the hook in an upwards direction to lift the disc (Figures 11) Figure 11: …then pull hook upwards contents (Figures 12) To clean, simply wash the diffuser disc and www.waterloo.co.uk Tel: +44 (0) 1622 711500...
Page 7
Waterloo Product Range Waterloo Product Range GRILLES DIFFUSERS The design allows a large optimum capacity and also allows the customer to www.waterloo.co.uk Tel: +44 (0) 1622 711500...
Page 8
Tel: +44 (0)1622 711 500 Hyde Park House, Cartwright Street, Tel: +44 (0)161 367 1264 Fax: +44 (0)161 367 1262 EMS 590755 Waterloo declare that, at the time of print, all products are in and other European Organisations and will display the January 2019...
Need help?
Do you have a question about the WFO-P Series and is the answer not in the manual?
Questions and answers