Introductions; Specifications - aquatherm AT-5000 Installation, Use & Care Manual

Aquarium chiller w/ heater outlet
Table of Contents

Advertisement

Thank you for purchasing the Aquatherm Aquarium Chiller unit. This unit
has been designed to provide many years of trouble free service when
used as directed. For proper installation and use, please read this manual
carefully. It will guide you in the operation and care of this unit.
As part of a policy of continuous improvement, AQUATHERM reserves the right
to make design and specification changes for product improvement without prior
notice. The performance specification figures indicated are nominal values of
production units.
individual units.
Model: AT-5000
HP – 1/3 Plus
BTUs – 5,000
EER – 8.0
Tank Capacity – 100-400 Gallons
Heater Outlet – 1,000 Watts
Electrical Cord – 6' Detachable, 14 Gauge
Length – 12 inches
Height – 18 inches
Width – 12 inches
Weight – 48 lbs.
Voltage – 115-125v/60Hz
Maximum Breaker – 15 amp.
Inlet/Outlet Connections – 1" FPT
Water Flow
Minimum – 360 GPH
Maximum – 1,100 GPH
Temperature Control Range - 33° F to 99° F
Diode Indicators
All Brazed Fittings
INTRODUCTION

SPECIFICATIONS

There may be some deviations from these values and
4

Advertisement

Table of Contents
loading

Table of Contents