Download Print this page

JTS WA-88 Manual page 9

Uhf pll wireless portable active speaker

Advertisement

WA-88 BACK PANEL
■ Volume and Effect Control
1. Master volume control: for all sound except AUX input/output
2. Bass tone control: for all sound except AUX input/output
3. Treble tone control: for all sound except AUX input/output
■ Echo Function
4. Echo ON/OFF:
5. Echo volume control:
6. Echo time delay control: for MIC1/MIC2 and wireless module
7. Echo repeat control: for MIC1/MIC2 and wireless module
■ Wired Microphone Control
8. MIC1 input (φ6.3 phone jack): with independent volume control and echo effect
9. MIC2 input (φ6.3 phone jack): with independent volume control and echo effect
10. MIC1 volume control: for MIC1 input
11. MIC2 volume control: for MIC2 input
■ AUX Function
12. AUX volume control: for Guitar and AUX input & output
13. Guitar input
14. AUX input & output: with RCA jack
■ Power & Battery Function
15. Main Power Switch
16. AC Power Switch:Only when AC Power switch is in "ON", the external AC
power will connect to the system.
17.3P type AC power socket: whatever power switch is in "ON" or not, as soon as
AC power is connected, and AC power switch is in "ON", it will charge the
batteries.
Charger Indicator Status
Red and Flashing: Charging
Red and Light: Full
Green and Flashing: Low Voltage
Green and Light: Normal Voltage
Notice:
Normally charging would take between 6 to 8 hours to be full charged
18.External 24V battery input: Outside DC input would not charge the batteries.
19.AC Fuse:T2AL/250V for AC input
20.DC Fuse: 8A/250V for DC input
■ Wireless Module and Control
21. Wireless module: with independent volume control and echo effect
22. Wireless Microphone priority switch: Switching to "ON", all other sound source
will be eliminated as soon as wireless microphone begins being used.
■ CD/MP3 Player Module and Extended Speaker
23. CD/MP3 player module: with independent power switch
24. US-8001DB Dual channel diversity receiver. (Optional)
25. Extended speaker terminal (φ6.3 phone jack): suggested using 8Ω external
speaker since it will be parallelly connected with internal speaker.
07

Advertisement

loading

Related Products for JTS WA-88