Receiver Menu - Philips 28PW9509/05 User Manual

Receiver menu

TV
Sound
DVD
Recorder
Receiver
Setup
Demo
Install
Note: When Cinema Link is enabled, certain items of the Sound menu (see TV menu) are steered by the
audio receiver instead of by the TV.
&
Press the
MENU
é
Press the cursor down to select
"
Press the cursor right to enter the Receiver menu items.
'
Press the cursor up/down to select the submenu items.
Note: the audio receiver submenu items may only be selected if provided by the audio receiver (dependent on
the configuration setup and the sound signals transmitted).
Sound menu
Dependent on the audio receiver speakers configuration, you may not be able to select certain menu
items.
Sound
Receiver
Smart Sound
Treble
Bass
Loudness
3D effect
Night mode
Audio Only
Night mode (only functional with Dolby Digital sound broadcasting input)
The loud parts of the sound are lowered and the soft passages are raised.
You can enjoy surround sound without disturbing sleeping children or neighbours.
Audio only
This control enables you to blank the TV picture if the TV is used as centre speaker in the Cinema Link
system and if the audio receiver is reproducing sound unrelated to a TV picture.
Switch Audio only On
The message
Audio only
2
Surround Speakers
key on the remote control.
Receiver
Smart Sound,Treble, Bass
See the Instructions for Use for the TV.
Loudness
When
volume, the low and high frequencies are amplified so that the
natural balance is restored.
3D effect
3D effect
Pro Logic without the need of having rear speakers connected or
activated.
Select the level of 3D effect with the cursor left/right.
to only hear the sound and to switch off the picture.
appears on screen.
Automatic Manual
installation installation
.
is selected and when listening at low
Loudness On
enables you to experience the effect of Dolby Surround
Give name Reshuffle