Philips QC5002 Manual page 11

4203 000 33681
Cause 3: hair has accumulated in the comb attachment.
B
Remove the comb attachment and blow or shake the hair out
of it.
2 The motor lacks power.
Cause: hair has accumulated in the comb attachment.
B
Remove the comb attachment.
Remove the cutting unit.
Clean the cutting unit and the inside of the appliance with the
brush supplied (see chapter 'Cleaning').
3 Clipping results in an uneven haircut (varying hair lengths).
Cause: the comb attachment is not properly in contact with the head.
B
Make sure that the clipper is in such a position that the flat side
of the comb attachment is parallel to the head (see section
'Clipping with comb attachment').
02-02-2006 13:42 Pagina 11
ENGLISH 11