Fortin EVO-ONE Manual
Connect to revo
Hide thumbs
Also See for EVO-ONE:
- Quick installation manual (17 pages) ,
- Manual (12 pages) ,
- Quick start manual (9 pages)
Advertisement
Quick Links
REVO
Parts required (not included):
1
2
3
GUIDE # 88751 - REV.: 20190715
1x FLASH-LINK UPDATER
1x Microsoft Windows Computer with Internet connection
Plug in the FLASH-LINK UPDATER into the computer's USB port with the
provided USB cable.
Run Flash Link Manager Software.
EVO-ONE
into the FLASH-LINK UPDATER with provided
Plug in the
DATALINK cable.
Advertisement
Related Manuals for Fortin EVO-ONE
Summary of Contents for Fortin EVO-ONE
- Page 1 Parts required (not included): 1x Microsoft Windows Computer with Internet connection Plug in the FLASH-LINK UPDATER into the computer’s USB port with the provided USB cable. Run Flash Link Manager Software. EVO-ONE into the FLASH-LINK UPDATER with provided Plug in the DATALINK cable.
- Page 2 REVO PAGE 2 / 4 Once the flashing is done, CONFIGURATION CLICK on UNIT OPTIONS then SELECT Fortin2, CLICK SAVE, wait for the window to disappear Disconnect the EVO-ONE.
- Page 3 To program the remotes on the EVO-ONE, Turn IGNITION ON. Press and hold Valet switch until the side red light flash on EVO-ONE then release. Press and release the Valet switch 5 times. Press and release the Brake pedal once.
- Page 4 This module must be install by qualified technician. This instruction guide may change without notice. To download the installation guide, user guide, or the latest quick installation guide, visit: www.fortin.ca Technical support: TEL: 514-255-4357 / 1-877-336-7797 Copyright ©...