Removing The Trackball - J.Burrows JBTRACMSE Instruction Manual

• To re-establish connection between the device and the receiver. Follow below
steps:
1. Insert the wireless USB receiver into a new USB port.
2. Turn off the device and reinsert fresh batteries.
3. Turn of the device and press the connect button within 30cm of the wireless
receiver.
4. Your device should now be connected and ready to use.

REMOVING THE TRACKBALL

1. Place the mouse upside down on a flat surface and locate the hole where the
trackball is enclosed, then use a pen or a finger to apply pressure to "pop out" the
trackball.
2. Use a microfiber cloth to wipe the trackball and the trackball compartment.
Return the trackball by putting it back to its compartment. Make sure it is placed
securely and properly before returning to operate the device.
1 8