Use Of The Remote Control Rc4403 / 4411; Color Buttons; Cursor Buttons - Philips 50PF9731D/37B User Manual

Use of the remote control RC4403 / 4411 / 4421

When a button enables multiple options, a small list will be shown. Press repeatedly to select the next
item in the list.The list will be removed automatically after 6 seconds or press
immediately.
Attention: this remote control can not be programmed to work accessory devices.
POWER POWER
FORMAT FORMAT
MY CONTENT MY CONTENT
GUIDE GUIDE
FAV FAV
. .
. .
VOL CH
MUTE MUTE
-
SOURCE SOURCE
INFO PIP A/CH
POWER
Press to turn on/off the TV from or to standby mode.
Attention: the TV is never powered off completely unless
it is physically unplugged.
TV Press to select TV mode.
DVD STB VCR AUX
Press to select one of the system modes in which the
remote control can be used.
Demo on/off
DEMO
See p. 14.

Color buttons

When functions are attached to the color buttons, the
color buttons are shown on screen.
MY CONTENT / OPTION
To open and close the Quick access menu which contains a
few frequently used options, like Closed captions, Picture
format,...
GUIDE
To open and close the Electronic Program Guide. See EPG
(Electronic Program Guide) p. 37.

Cursor buttons

Press the cursor buttons up/down, left/right to navigate
through the menus.
Note: If necessary, you can adjust the picture position to
the center of the screen with the cursor buttons.
OK - to activate a setting
- to display the list of channels stored (according to the
selection made in the Installation mode - Antenna or
Cable, p. 15.)
- starts playing content in the Multimedia Browser
application, p. 37.
Settings menu on/off. See p. 13.
MENU
FAV To display the favorite channels list.
OK to remove
7