Advertisement
2.
Select the count mode
This machine can work in two ways: free count and batch count
mode .The count mode can be selected by presetting the batch
number.
◆ Free Count Mode
In this mode, the machine counts all the coins in the hopper
with no stoppage until one of coins receiving slot is full. This mode
machine will preset the Batch Number itself when power up.
◆ Batch Count Mode
In this mode, the machine counts a batch coins according to the
presetting number. This count mode will be set by presetting an
expected number on the Batch Number Display. Before counting,
please use the "SET" KEY to select which kind of the coins you
want to preset and then use "+","-" and "BAT" KEY to preset the
expected number.
3.
Put the coins to the hopper, and the coins should not be piled up
higher than the top of the shunting stick one time and then it
press the "START&STOP" KEY to start counting.
4.
When finish counting, please press the START&STOP KEY to
stop the machine, or it will auto stop after about 20 seconds.
5.
If you want to get the result of each kind coins, press the
"Report" Key and then the machine will display the individual
number for the each kind of coins, and then press "C" KEY it
will return to display total value of all the coins.
Auto Coin Counter Operation Instruction
5
Advertisement
