Basic Cable Box Connection - Philips 32PT541S Directions For Use Manual

32"color tv faux flat black cab.
Hide thumbs Also See for 32PT541S:
Table of Contents

Advertisement

I
f you cable signal uses a cable box or
decoder, follow the easy steps below to
complete the connection.
Cable Box (w/RF In/Outputs):
This connection will NOT supply Stereo sound
to the TV. The sound from the cable box will
be mono.
1
Connect the open end of the round
Cable Company supplied cable to the
cable signal IN(put) plug on the back
of the Cable Box.
2
Using a separate round coaxial cable,
connect one end to the OUT(put) (TO
TV) plug on the back of the Cable
Box.
3
Connect the other end of the round
coaxial cable to the 75Ω input on the
back of the television. Screw it down
finger tight.
NOTE: Be sure to set the OUTPUT CHAN-
NEL SWITCH on the back of the cable box to
CH 3 or 4, then tune the TV to the correspon-
ding channel. Once tuned, change channels at
the cable box, not the television.
Cable Box (w/Audio/Video
Outputs):
This connection will supply Stereo sound to the
TV.
4
Connect the open end of the round
Cable Company supplied cable to the
cable signal IN(put) plug on the back
of the Cable Box.
5
Using a RCA type Video Cable, connect
one end of the cable to the Video (or
ANT, your cable box may be labeled dif-
ferently) Out jack on the cable box and
the other end to the AV1 Video Input on
the TV.
6
Using a RCA type Audio Left and Right
Cable, connect one end to the left and
right Audio Out L & R jacks on the
cable box. Connect the other end to the
AV1 Audio L & R Input jacks on the TV.
NOTE: Use the Channel +, or – buttons on the
TV remote control to tune to the AV1 channel
for the cable box signal. Once tuned, change
channels at the cable box, not the television.
B
C
B
ASIC
ABLE
OX
Cable Box Connection (RF Input/Output Only):
Cable Signal
IN from the
Cable
Company
Round 75Ω
Coaxial Cable
Cable Box Connection (with Audio/Video Outputs):
Cable Signal IN
from the Cable
Company
CABLE
IN
/D
C
ECODER
ONNECTION
3
2
CABLE
IN
4
Jack Panel Back
5
of Cable Box
OUTPUT
CH
3
4
L
R
TO
VIDEO
AUDIO
TV
OUT
OUT
Video Cable
6
Monitor out
AV2 in
AV1 in
VIDEO
Y
L/Mono
Pb
AUDIO
R
Pr
COMPONENT VIDEO INPUT
Jack Panel Back of TV
8
Jack Panel Back of Cable Box
OUTPUT
CH
3
4
TO TV
ANT 75‰
Monitor out
AV1 in
AV2 in
VIDEO
Y
L/Mono
AUDIO
Pb
S-VIDEO
R
Pr
COMPONENT VIDEO INPUT
Jack Panel Back of TV
Cable Box with
Audio/Video Outputs
24
RCA type Audio
Left and Right
Cables
ANT 75‰
Monitor out
AV1 in
AV2 in
VIDEO
Y
L/Mono
AUDIO
Pb
S-VIDEO
R
Pr
COMPONENT VIDEO INPUT
S-VIDEO
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

32-color tv faux flat black cab. 32pt541sColor tv

Table of Contents