Summary of Contents for Olimpia OC 1280 P
- Page 1 ...easy to operate using the ProHome or ProHome IPC app OC 1280 P IP Camera with receiver for alarm systems from the ProHome and Protect series Quick Start Guide...
- Page 2 Do you need detailed descriptions on how to use the app and operate the camera? Visit us at www.olympia-vertrieb.de...
-
Page 3: Table Of Contents
Contents Detailed Operating Instructions ... . 15 Before You Start ......4 Safety Instructions . -
Page 4: Before You Start
Read and observe all the safety information to protect observe all the information contained when using yourself and the environment from any harm. the OC 1280 P IP camera. Keep the operating manual in a safe place for future reference. The following warnings indicate potentially dangerous situations which could lead to serious injuries or even Pay attention to this symbol. -
Page 5: Intended Use
SAFETY INSTRUCTIONS Intended Use The following warnings indicate potentially dangerous The OC 1280 P IP camera (subsequently referred to as situations which could lead to property damage if the camera) is designed to perform video surveillance (CCTV) information is ignored. of indoor and outdoor areas by day and night. ! Only use original accessories. -
Page 6: General Overview
GENERAL OVERVIEW General Overview System Requirements This section provides information on the package con- When using an alarm system from the Protect series, the tents of the camera, the system requirements to operate installation location of the camera must be within trans- it with the app and contains a summary of the functions mission range of the base unit of the alarm system. -
Page 7: General View
GENERAL OVERVIEW General View Infrared LEDs (night vision) Connection cable (several interfaces) Device mounting bracket Brightness sensor Lens Union nut for mounting bracket Antenna (Wifi) Interfaces (see Page 8) Interfaces (see Page 11) IP C OC 1280 AMERA... -
Page 8: Interfaces On Connection Cable
GENERAL OVERVIEW Interfaces on Connection Cable Receiver for Connection to Alarm System LEDs (network activity) Plug (for power supply) Port (for network cable) Status LED (not illustrated here) Port (for connection to the receiver) Port (for power supply) Port (for power supply) Plug (for connection to camera) Reset button IP C... -
Page 9: Connecting The Camera
CONNECTING THE CAMERA Connecting the Camera This section provides information on how to connect and If you want to integrate the camera in an alarm system, position the camera. you must use the receiver supplied. If you do not want to integrate the camera in an alarm system, skip this section Connecting the Camera and continue with Use Without an Alarm System. - Page 10 CONNECTING THE CAMERA Registering the Receiver on the Alarm System Use Without an Alarm System The following section describes how to register the receiver on the alarm system. Disconnect the power adapter from the power socket. Select the Register menu option on the base unit of the alarm system according to the relevant operating manual.
-
Page 11: Connecting The Camera - Network Cable
CONNECTING THE CAMERA Connecting the Camera - Network Cable Last Steps Prior to Assembly Connect the network cable to the network connection Disconnect all the cable connections before beginning port on the camera and a free network connection port with the installation work. (LAN) on the router. -
Page 12: Installing The Camera
CONNECTING THE CAMERA Installing the Camera ! Risk of fatal injury from electric shock or ARNING gas explosion! During installation, pay attention to the possibility of electrical cables and gas pipes running in the walls. Pay attention that you do not damage electric cables or gas pipes. -
Page 13: Assembling The Cable Box
CONNECTING THE CAMERA Assembling the Cable Box After assembling the camera you can stow the connec- Use the holes in the cable box as a drilling template tion cable and, if necessary, the receiver in the cable box and drill four suitable holes in the wall or ceiling. in order to protect the remaining length of the cable from unauthorised access. - Page 14 CONNECTING THE CAMERA Using a Receiver Connect the plug on the receiver to the port on the Feed the power cable through the right-hand cable connection cable of the camera. gland into the cable box. Connect the plug on the power adapter to the port in Place the lid on the cable box and screw the lid on the receiver.
-
Page 15: Aligning The Camera
DETAILED OPERATING INSTRUCTIONS Detailed Operating Instructions Aligning the Camera Loosen the union nut on the device base. The way in which to connect the smartphone and camera Aim the camera at the area you want to monitor. and control them via the app is explained in the corre- sponding operating manual provided with the ProHome app or ProHome IPC app. -
Page 16: Appendix
APPENDIX Appendix Technical Data Weight Approx. 350 g (without accessories) Dimensions 175 mm x 65 mm (L x D), connection cable 1400 mm Permissible ambient conditions -20 °C to +70 °C at 20% to 80% rel. humidity Transmission frequency 868.5 MHz (radio), 2.412 - 2.484 GHz (WiFi) Transmission power (max.) 1 mW (radio), 63.1 mW (WiFi) Power supply... -
Page 17: Troubleshooting
APPENDIX Troubleshooting I cannot register the receiver on the alarm system. My camera is not detected within the network. Check all the cable connections. Observe the information Check all the cable connections. Observe the information in Section Connecting the Camera on Page 9. in Section "Connecting the Camera". -
Page 18: Cleaning And Service
APPENDIX Cleaning and Service Guarantee and Service Disconnect the camera from the power outlet before Dear Customer, cleaning it! Clean the surface of the housing with a soft, lint-free we are pleased that you have chosen this equipment. cloth. Never use any chemicals or scouring agents. In the case of a defect, please return the device togeth- Information on Disposal er with the receipt and original packing material to the... - Page 19 APPENDIX IP C OC 1280 AMERA...
- Page 20 Art. No. 5929 / Version 01.2018 Quick Start Guide IP Camera, OC 1280 P...