Selecting Pre-Cocking Mode - Gate Aster BASIC Quick Start Manual

Selecting Pre-cocking mode

Turn on 'Switch mode via fire selector' parameter for Pre-cocking in GCS to be able
to use this function.
1. Fire a shot, burst or pull the trigger while in Safe mode*
2. Keep the trigger hold
3. Switch fire selector within 2 s. You should hear 1 low vibration.
4. Now each fire selector switch means a next option:
a. 1 low vibration – Pre-cocking off
b. 2 low vibrations – Pre-cocking on
5. Release the trigger to save selected mode
* If safety lever is removed
24