NGS GLEAM 514C User Manual page 3

USER'S MANUAL
Connecting the NGS GLEAM
smart light (easy mode)
• Insert the NGS smart light in the corresponding bracket, open the
NGS Orb app on your mobile device and select "Add devices (+)",
located in the upper right corner.
• Select the desired product category and check that the light is
flashing quickly. If you need help, select "View help" in the app. *
• Choose the local WiFi signal and enter your password to confirm
the network. Make sure you are using a 2.4GHz network signal.
• Wait until it is correctly synced and then rename your NGS
device. **
*
ENGLISH
**
Connecting the NGS GLEAM
smart light in AP mode
• When the light is flashing quickly, manually turn the light on and
off 3 times until the light flashes slowly, which means it is entering
AP mode.
• Follow the steps indicated on your device to set it up in this mode.
• Wait for it to sync correctly and then select "Confirm".
3