Advertisement
Quick Links
THANK YOU
Thank you for purchasing the EWR Wall Cabinet. Please read these instructions thoroughly
before installing / assembling this product.
PRODUCT FEATURES
- Ideal for both secure and non-secure areas
- Tool-free Quick-Mount system for easy one-person mounting of the
center section to the backpan
- Vented center section enables the effective passive thermal management
Instruction Sheet
EWR SERIES
EWR WALL CABINET
TM
U L
C
US
R
LISTED
I-00076
Rev H
Advertisement
Related Manuals for Middle Atlantic Products EWR Series
Summary of Contents for Middle Atlantic Products EWR Series
- Page 1 Instruction Sheet EWR SERIES EWR WALL CABINET LISTED THANK YOU Thank you for purchasing the EWR Wall Cabinet. Please read these instructions thoroughly before installing / assembling this product. PRODUCT FEATURES - Ideal for both secure and non-secure areas - Tool-free Quick-Mount system for easy one-person mounting of the...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS • Read these instructions. WARNING: A WARNING ALERTS YOU TO A SITUATION THAT COULD RESULT IN SERIOUS PERSONAL INJURY • Keep these instructions. OR DEATH. • Heed all warnings. CAUTION: A CAUTION ALERTS YOU TO A SITUATION THAT MAY RESULT IN MINOR PERSONAL INJURY OR •... -
Page 3: Installation
INSTALLATION 1) Remove security clips located at top and bottom of unit. (FIGURE A) PIVOT PIN NOTE: EWR center section can be opened from left-to-right or vice versa depending on how backpan is installed. SECURITY CLIP FIGURE A 2) Remove pivot pins located at the top and bottom of backpan. -
Page 4: Cable Management
INSTALLATION (Continued) 6) Align bottom of center section with lower pivot bushing on backpan. (FIGURE D) BACKPAN UPPER PIVOT BUSHING 7) Pivot top of center section into backpan and PLACE HAND align with upper pivot bushing. (FIGURE D) HERE TO PIVOT INTO PLACE 8) Insert pivot pin into upper bushing, hand tighten fully and then back out one turn. -
Page 5: Grounding And Bonding
GROUNDING AND BONDING Protective Earth Terminals (PET) are located in backpan of the wall rack. These terminals are marked with the symbol Wall rack parts, center section and door, contain or are provided with bonding points for connection to the backpan / PET. Protective earth and bonding connections shall be in accordance with Article 250 of the National Electric Code. -
Page 6: Front View
GROUNDING AND BONDING 1) Attach backpan bonding wire from 1/4”-20 backpan protective earth terminal (PET) to nearest center section bonding stud (10-32) using hardware provided. (FIGURE G) NOTE: The main protective earth ground needs to be the first terminal placed on the PET and this terminal needs to be secured on its own with a nut. - Page 7 WARRANTY Middle Atlantic Products (the "Company") warrants the EWR Seriers EWR Wall Cabinet to be free from defects in material or workmanship under normal use and conditions for the lifetime of the product. The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and exclusive remedy, under this warranty...