Operation - Duramaxx 10024162 Manual

Operation

Battery
One 9V block battery is included; this should be placed into the battery compartment in the
manner indicated on the base plate.
Positioning of the Scales
Please ensure that the scales are in a horizontal position.
Weighing ( ON/OFF)
After switching on the scales with the ON/OFF key „ all segments are shown on the display.
Please wait until the zero appears. Then place the weight on the scales and read off the
weight shown.
Net Weighing (tare)
Place an empty container (or the first weight) on the scales and press the „tare"–button
until the zero appears. Fill the container (or place the second weight on the scales). Only
the additional weight is indicated in the display.
Switch-off (ON/OFF)
Press the „ ON/OFF"-button. Automatic switch-off after 2 minutes whether weight is on the
scales or not, if no change of weight occurs in this time.
Changing the weighing units: Kg, Lb (mode)
This scales can show the weight in either kg or lbs. Press the „mode"–button until the re-
quired weighing unit appears.
Counting (PCS)
When the „zero" appears place the reference weight on the scales. Then press the „PCS"
button and hold until „100" appears in the display. Press the (25; 50; 75 or 100) and the
press the „ PCS "–button once again.
8