ION Party Ball Fogger Quick Start Manual page 9

Fluid
We recommend using high-quality water-based fog fluid with Party Ball Fogger. You can
purchase this from a local or online retailer.
Important:
•
Using non-water-based fluids with this product will void its warranty.
•
Do not use flammable liquids such as oil, gas, perfume, etc. with this product.
•
Do not ingest any of the fluids used in this product. If you do so accidentally, contact a
medical professional immediately. Rinse your eyes and skin thoroughly if they come into
contact with the fluid.
Usage
Throughout operation, make sure there is enough fluid in the tank. Using Party Ball Fogger
without any fluid can damage it.
If Party Ball Fogger is emitting an unusually low amount of fog or making an unusual noise,
power it off immediately. Make sure that the tank has enough fluid and that the fuse is not
damaged.
When you are done using Party Ball Fogger, power Party Ball Fogger off, and wait for about 1
minute for it to cool down.
Important: Depending on the amount of fog generated, this product may set off smoke
detectors. In certain environments after prolonged use, the fog produced may leave a slippery
residue on floors and other surfaces.
Cleaning
We recommend cleaning it after each use to prevent eventual build-up or blockages, which
can result in poor performance, overheating, and damage.
After each use, power Party Ball Fogger off, and wait for about 1 minute for it to cool down.
Wipe its surfaces and empty tank using a soft, clean cloth.
After every 40 hours of use, use Party Ball Fogger as described above (in
but use a mixture of 80% distilled water and 20% vinegar instead of the normal fluid. This will
help remove build-up in the nozzle.
Important: Do not clean Party Ball Fogger using solvents or harsh detergents.
Setup and Usage),
9