Related Manuals for Origin 150BV HEPA
Summary of Contents for Origin 150BV HEPA
- Page 1 Precision Engineered 150BV HEPA Owners Operating Guide Origin Cleaning Equipment Pty Ltd PO Box 526 South Windsor NSW 2652 origin@ozemail.com.au Made in Australia...
- Page 2 SAFE AND PROPER USE OF THIS MACHINE Make sure that this manual is read and understood by the operator. Only trained operators should operate this machine once they are familiar with the adjustments and correct method. When using this machine, basic safety precautions should always be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.
- Page 3 Contents Attachment of Vacuum Tools The Floor Tool (1) is universal and can be used on soft or hard floors. The Handle Grip has a slider ( 2 ). When the slider is open the suction power is reduced. The reduced suction allows vacuuming of furniture or drapery, etc. The Telescopic Wand has an adjustment Tab ( 3 ).
-
Page 4: Operating The Vacuum
Fitting Unit to the Operators Back 2. Waist back pad adjustments (see Fig. 9) a) To unfasten hip belt pull Velcro flaps apart. b) To tighten waist belt pull both flaps until firm tension is felt from the supporting side elastic and make sure that the flap with the Velcro (right side) is against the body. - Page 5 Maintenance and Storage Filter Bag 1. Always empty the filter bag when full. 2. Make sure the bag support stand is in position at the bottom of the canister under the filter bag (see Fig. 15). N.B. This support stand must always be in position to maintain vacuuming performance.
- Page 6 Remove / replace HEPA filter. When replacing filter make sure the gasket side is in contact with the canister base. Only use the approved Origin HEPA filter. Replace the bag stand by inserting the three lugs into the upright posts on the canister base.
- Page 7 All warranted items become the sole property of Origin Cleaning Equipment Pty Ltd. This limited warranty is in lieu of all other warranties, expressed or implied, and releases Origin from all other obligations and liabilities. Origin is not responsible for costs for repairs performed by persons other than those specifically authorized by Origin.
Need help?
Do you have a question about the 150BV HEPA and is the answer not in the manual?
Questions and answers