DIGITAL YACHT WL400 Installation & Quick Start Manual

Wireless adaptor/antenna

Advertisement

Installation & Quick Start Guide
WL400 Wireless Adaptor/Antenna
QUICK START WL400-01- VR1.1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WL400 and is the answer not in the manual?

Questions and answers

Summary of Contents for DIGITAL YACHT WL400

  • Page 1 Installation & Quick Start Guide WL400 Wireless Adaptor/Antenna QUICK START WL400-01- VR1.1...
  • Page 2: Before You Start

    Holding the coiled USB against the WL400, carefully screw the WL400 to the bracket, ensuring that the USB lead does not become twisted. Route the USB lead through to the computer that you wish to connect the WL400 to but do not plug the USB lead in to the computer. Proceed to Section 4 - “Driver/Software Installation”.
  • Page 3 4. Driver/Software Installation It is very important that you do not plug the WL400 in to a USB port on your computer unless you have the WL400 Drivers USB Memory Stick or CD-ROM close to hand. By plugging in the WL400 you will initiate the Windows “Found New Hardware Wizard”...
  • Page 4 Click on the “Available Network” tab and the window shown in Fig 7 will appear which lists all of the available wireless networks that the WL400 can detect. Select the wireless network that you wish to connect to and click the “Add to Profile”...
  • Page 5 Installation for LINUX Due to the large number of different LINUX distributions, it is not possible to guarantee that the WL400 will work on all distributions. It has been tested on Ubuntu V8.04.2 (a Debian based distro) with Kernel V2.6.24 and all drivers were included in this distro.

Table of Contents