Diode And Continuity Test - Prokit’s MT-1705 User Manual

20MΩ
Open voltage: less than 3V.
Overload protection: 250V DC or AC peak value.
NOTE:
1. At 200Ω range, the test leads should be short-circuited,
and measure the lead to lead resistance, then, subtract from the
real measurement.
2. It is normal for reading to be slow when measured value
is above 1MΩ, please read it after the display value stabilizes.
2.2.6 CAPACITANCE (C)
RANGE
20nF
200nF
2uF
20uF
200uF
2000uF
Overload protection: 250V DC or AC peak value
NOTE: when over range, it can keep on measuring, "OL" will not
show on LCD and the value is for reference only
2.2.7 FREQUENCY
RANGE
10Hz
100Hz
1kHz
10kHz
100kHz
2MHz
Input sensivity:1V RMS , overload protection : 250V DC or AC
peak value(less than 15 seconds)
NOTE: when over range, it can keep on measuring, "OL" will not
show on LCD and the value is for reference only

2.2.8 DIODE AND CONTINUITY TEST

±(1.0%+25)
ACCURACY
±(3.5%+20)
±(5.0%+10)
ACCURACY
±(1.0%+10)
4
10kΩ
RESOLUTION
10pF
100pF
1nF
10nF
100nF
1uF
RESOLUTION
0.001Hz
0.01Hz
0.1Hz
1Hz
10Hz
100Hz