Related Manuals for Kangaroo Golf Vortex
Summary of Contents for Kangaroo Golf Vortex
- Page 1 T H E G O L F E X E R C I S E M A C H I N E QUICK START GUIDE Handle Chassis Front Wheel Assembly Quick-Release Rear Wheels Your Kangaroo Vortex will arrive in five separate pieces. They are the handle, chassis, rear wheels and front wheel assembly.
-
Page 2: Free Wheeling Mode
Step 1: Attach Rear Wheels to Chassis • Remove protective covers from main axle. • On outside of rear wheels, locate and push wheel release button. • Place wheel on axle, aligning drive pins on axle with four holes in wheel panel. - Page 3 Step 3: Attach Handle to Chassis • Open draw latch on top of chassis. • Insert handle into hole and secure draw latch. • Remove three plastic tie-wrap bands from handle. • Plug in handle assembly wire to receptacle on chassis. Upper Bag Support is adjustable to accommodate height...
-
Page 4: Step 4: Operation
Step 4: Operation • Be sure the power switch is set to off. • Set speed control all the way down (slow) and turn power on. Then, slowly increase speed until you find your desired pace. AutoBrake 2.0. Take control on steep declines with AutoBrake 2.0., Kangaroo’s new and improved braking system. - Page 5 Fully Charge Battery Go ahead and charge your battery before using your Vortex. To charge battery, attach charger to port on left side of battery, then plug charger into wall socket. When green light turns on, battery is fully charged. Disconnect battery from charger when charge is complete.
- Page 6 Packing & Shipping Material We suggest saving the box and packing material that was packed with your Vortex in case you need to send in your caddie for repair. Contact Us If you have any questions about your Vortex, Natasha...