Philips Satin curl aqua HP4640 Manual page 6

ENGLISH
6
One push will suffice to set one curl or wave.
5 Hold the brush in place as long as required (normally 8 to
10 seconds) (fig. 8).
6 To remove the brush from your hair, push the button and slide
the brush out of your hair (fig. 9).
Make sure you keep the brush away from the underlying hair when
you remove it.
7 Let the curls cool down before combing, brushing or finger-
combing the hair to finish your style (fig. 10).
Cleaning
Always unplug the appliance before cleaning it.
Never rinse the appliance with water.
1 Clean the appliance with a small brush or a dry cloth.
2 To prevent the build-up of scale, put 3-4 drops of vinegar in the
Cool Tip water reservoir, top it up with water and plug in the
appliance.After a few minutes, i.e. when the ready dot has turned
black, activate the steam function for 3 seconds.Activate the
steam function 10 more times, then unplug the appliance and
rinse the Cool Tip water reservoir with fresh water.
Storage
Always unplug the appliance before storing it.
Unscrew the Cool Tip water reservoir and pour out the
remaining water (fig. 11).
Put the appliance in a safe place and let it cool down before
storing it.
Do not wind the mains cord round the appliance.