Table of Contents
Advertisement
Quick Links
Innosource BV
Vennestraat 17
2161 LE Lisse
Postbus 394
2160 AJ Lisse
The Netherlands
Tel.: +31 (0)252 226602
Fax.: +31 (0)252 235141
E-mail: info@innosource.nl
Internet: www.innosource.nl
Installation manual
Advertisement
Table of Contents
Summary of Contents for Innosource Sonair A+
- Page 1 Innosource BV Vennestraat 17 2161 LE Lisse Postbus 394 2160 AJ Lisse The Netherlands Tel.: +31 (0)252 226602 Fax.: +31 (0)252 235141 E-mail: info@innosource.nl Internet: www.innosource.nl Installation manual...
- Page 2 Parts Introduction The Sonair must be mounted on the inside of an outside wall, and nearby a power socket. A hole must be drilled in the wall to provide the air supply. The hole’s diameter can vary between 104 and 125 mm. A duct is placed inside the hole, and a grille is placed in the duct on the outside wall.
- Page 3 Step 2 In the box you will fi nd a mounting mould. This mould will help you to determine the position of the hole for the air rondom afkitten inlet and the mounting screws. We advise you to stick the mould onto the wall with tape. Determine the position of the hole for the air inlet and the mounting screws.
Need help?
Do you have a question about the Sonair A+ and is the answer not in the manual?
Questions and answers