biblio Leaf
SP02
Basic Guide
Basic Guide
Use only
the
stylus pen (provided) to
operate the touch panel!
December 2010, 1st Edition
Do not use fingers or
Sold by: KDDI CORPORATION, Okinawa
other pen-shaped
Cellular Telephone Company
Imported by: KAGA ELECTRONICS CO., LTD
objects.
Manufactured by: HON HAI PRECISION IND.
CO., LTD
Accessories
①biblio Leaf SP02 (including
②Instruction
battery pack and battery
Manual
cover) and stylus pen
biblio Leaf
タッチパネルの操作には
必ず付属のスタイラスペンをお使いください !
指や他のペン状のものでは操作できません。
③Basic Guide
④Warranty
⑤biblio Leaf
SP02 AC
adapter 01
biblio Leaf
SP02
はじめてガイ ド
はじめてガイ ド
タッチパネルの操作には
必ず
付属のスタイラスペンを
お使いください !
指や他のペン状のものでは
2010年12月第1版
発売元:KDDI (株) ・ 沖縄セルラー電話 (株)
操作できません。
輸入元:加賀電子 (株)
製造元: HON HAI PRECISION IND.CO.,LTD
⑥biblio Leaf SP02 USB
⑦biblio Leaf SP02
cable (sample)
book cover
Charging
There are two ways of charging the battery pack, charging by the AC adapter and by charging from a PC.
The charging LED lights red during charging.
●Charging by the AC adapter
Insert the larger end of the USB cable into the AC adapter connector ( ①)
1
Insert the smaller end of the USB cable into the USB connector on the product ( ②)
2
Insert the AC adapter's power plug into the power outlet ( ③)
3
●Charging from a PC
1
Start up the PC
2
Insert the larger end of the USB cable into the USB connector on the PC (④)
3
Insert the smaller end of the USB cable into the USB connector on the product ( ②)
Tap "Charging Mode" on the product
4
Names of parts
Stylus pen and
stylus pen holder
SP02
安全上のご注意
目次
ご利用の準備
基本操作
ライブラリ (電子書籍)
LISMO Book Store
ツール
設定
ソフ トウェア更新
付録
6
Zoom in key
7
Zoom out key
Display
1/2
Up/down keys
3 ○ key
Charging LED
②
Turning the power on/off
8 Power key
Battery cover
Knob
Speaker
4 × key
5 Menu key
Solar panel
RESET button
Earphone terminal
Memory card slot
USB connector
①
③
④
To turn the power on, press and
hold 8 (power key) until "au
by KDDI" appears.
To turn the power off, press and hold
8 (power key) until the power
turns off.
You can activate the screensaver (sleep mode)
to save battery power.
●Activating the screensaver manually
You can activate the screensaver (sleep mode)
manually by pressing 8 (power key).
●Activating the screensaver auto-
matically
The screensaver is automatically activated
after you have not operated the product for
a fixed length of time.
* To exit the screensaver, press 8 (power
key) again.
* Note that pressing and holding 8 (power
key) turns the power off.