Philips 42PFL5403/77 User Manual page 46

Troubleshoot
The picture is
mostly red and
green, or the pic-
ture is missing red
when the TV is
connected to an
accessory device
via component
cables.
No sound on the
TV loudspeaker.
Bad picture qual-
ity with a coaxial
connection.
No picture or
sound.
Cannot control
your TV and
connected devices
with one remote
control.
Insecure/incor-
rect connection.
Volume level is
set to zero.
Sound is muted.
Headphones are
connected.
Audio cable is
not connected.
Accessory device
audio output set-
ting is incorrect.
Standard defini-
tion channels are
not as clear as
high definition
channels.
Incorrect channel 1. Ensure you have selected the correct channel.
Incomplete chan-
nel installation.
1. Ensure all the connections are made according to
the color code.
2. Push the component cables all the way into the
YPbPr sockets on the TV.
1. Increase the volume.
2. Press MUTE on the remote control.
3. Ensure the headphones are not plugged into the
TV.
4. For AV connection, ensure that the Audio L/R
cable is connected.If you are using a component
cable, ensure that you have not crossed the red
audio cable with the red video cable.
5. For HDMI connections, some accessory devices
have an HDMI audio output setting that must be
turned on for HDMI to HDMI connections.
1. Connect the devices via component or HDMI
cables.
1. If the TV receives channels via an AV connection,
set the TV to the correct source input and perform
the auto installation again.
2. If the TV is connected directly to the wall via a
coaxial connection, perform the auto-installation
again.
1. Confirm that the connected devices are EasyLink
compliant and are connected to your TV via an
HDMI cable. Not all brands of devices such as DVD
players use the same system as Philips EasyLink.
Other brands might not work with Philips EasyLink.
46